Home / Shop
- Description
- Specifications
Cisco uses the PWR-C6 power supplies on the modular Catalyst 9200 switches, and this is the 1000 W AC model. The Catalyst 9200 data sheet lists it as the default supply on the full-PoE+ C9200-48P, C9200-48PB and C9200-48PXG, where the fixed-uplink C9200L models use the separate PWR-C5 series instead. Cisco's Catalyst 9300 hardware guide also lists it, described as Platinum-certified, for the C9300LM switches.
The C9200 hardware guide gives 1000 W maximum output at 54 V and 16.5 A, from 100-240 VAC autoranging at 12-6 A, 50-60 Hz, with 3412 BTU/hr total output. The module weighs 2 lb (0.9 kg) and is a field-replaceable unit in the modular C9200.
PoE budget: on a C9200-48P, one PWR-C6-1KWAC gives 740 W of PoE and two give 1440 W. A PWR-C6-715WDC can share the switch with it as primary or secondary. On the C9300LM-48U-4Y and 48UX-4Y it is the default supply with 790 W of PoE, rising to 1790 W with a second 1000 W unit.
Siblings: the PWR-C6-600WAC suits the partial-PoE C9200-48PL and 24-port PoE models, and the PWR-C6-125WAC powers the non-PoE C9200. It does not fit the C9200L (PWR-C5) or the standard C9300 (PWR-C1). Match the PID on the label of the existing supply before ordering.
More from this family: Cisco Misc.
Related parts: PWR-C1-350WAC, C9200-NM-4G.
| PWR-C6-1KWAC Specs | |
| Part number | PWR-C6-1KWAC (PWR-C6-1KWAC=) |
| Output | 1000 W, 54 V at 16.5 A |
| Input | 100-240 VAC autoranging, 12-6 A, 50-60 Hz |
| Heat output | 3412 BTU/hr |
| Default on | C9200-48P, C9200-48PB, C9200-48PXG |
| Also listed for | Catalyst C9300LM (Platinum-certified per HIG) |
| PoE (C9200-48P) | 740 W with 1 PSU, 1440 W with 2 |
| PoE (C9300LM-48U-4Y) | 790 W with 1, 1790 W with 2 |
| Weight | 2 lb (0.9 kg) |
| Not for | C9200L (PWR-C5), C9300 (PWR-C1) |
| Siblings | PWR-C6-600WAC, PWR-C6-125WAC, PWR-C6-715WDC |