Home » Store » Dell » Dell Servers HDD » M40TH Dell 8TB 7.2K SAS 3.5in, Seagate ST8000NM0185

M40TH Dell 8TB 7.2K SAS 3.5in, Seagate ST8000NM0185

The Dell M40TH is an 8TB 12Gb/s nearline SAS hard drive at 7,200 rpm in a 3.5 inch large form factor, a 512e drive built on the Seagate ST8000NM0185.

Sourcing mission-critical hardware shouldn't mean gambling on auction sites or automated shopping carts. You get direct access to dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop / Dell / EMC / Storage (Dell / EMC)

M40TH Dell 8TB 7.2K SAS 3.5in, Seagate ST8000NM0185
M40TH Dell 8TB 7.2K SAS 3.5in, Seagate ST8000NM0185
M40TH Dell 8TB 7.2K SAS 3.5in, Seagate ST8000NM0185

Home / Shop / Dell / EMC / Storage (Dell / EMC)

M40TH Dell 8TB 7.2K SAS 3.5in, Seagate ST8000NM0185

Model Number: M40TH
The Dell M40TH is an 8TB 12Gb/s nearline SAS hard drive at 7,200 rpm in a 3.5 inch large form factor, a 512e drive built on the Seagate ST8000NM0185.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: Dell Servers HDD
Manufacturer: Dell
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

In the supported-drive table of Dell's MD34XX/38XX support matrix, M40TH maps to the Seagate model ST8000NM0185, a 3.5-inch 7.2K rpm drive of 8 TB.

The firmware Dell lists for it is PT54 in the MD34XX/38XX matrix, PT51 in the MD32XX/36XX matrix and PT55 in the ME484 JBOD matrix. It is not a self-encrypting (SED) model.

The 3.5-inch MD34XX/38XX models are the MD3400 direct-attached SAS array, the MD3800i iSCSI array and the MD3800f Fibre Channel array, each with 12 drive bays, alongside the dense 4U models.

Up to nine MD1200 or MD1220 enclosures give 120 slots; a premium feature option raises the limit to 15 enclosures and 192 slots.

Dell's MD32XX/36XX matrix also carries it, covering the MD3200 and MD3600 series and the dense MD3260, MD3260i, MD3660i and MD3660f.

The ME484 connects to a single server through a Dell HBA355e or 12 Gbps SAS HBA and is managed with PowerTools Server Hardware Manager rather than iDRAC.

Dell classes 7.2K nearline SAS as Capacity Optimized: much higher capacities, but lower reliability and performance than Mission Critical drives.

Dell states that drives with part numbers outside its list are not supported, even when bought from Dell.

Because it is 6 TB or larger, Dell recommends placing it in a RAID 6 disk group or a Dynamic Disk Pool, since longer rebuilds raise the risk of a second failure in RAID 1/10 or RAID 5.

Fit check: compare your array model with the matrices named above, then check the drive label for ST8000NM0185. Compare the 9HXK6 12 TB or KRM6X 4 TB. The Dell PowerEdge parts hub lists further Dell parts.

M40TH Specs 
Dell part numberM40TH
Drive modelST8000NM0185
VendorSeagate
Capacity8 TB
Type / speed7.2K rpm HDD
Form factor3.5 inch
SEDNo
Firmware (MD34XX/38XX matrix)PT54
Firmware (MD32XX/36XX matrix)PT51
Firmware (ME484 matrix)PT55
Listed inMD34XX/38XX, MD32XX/36XX, ME484 JBOD support matrices