Home » Store » Dell » Dell Misc » 330-BBCR: Dell R730 and R730xd PCIe riser 1, right

330-BBCR: Dell R730 and R730xd PCIe riser 1, right

Dell R730 and R730xd PCIe riser 1, right. Part number 330-BBCR.

Built for end users, business partners, government agencies, and contractors, we replace auction-site guesswork with direct human support. You get dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

330-BBCR: Dell R730 and R730xd PCIe riser 1, right
330-BBCR: Dell R730 and R730xd PCIe riser 1, right
330-BBCR: Dell R730 and R730xd PCIe riser 1, right

Home / Shop

330-BBCR: Dell R730 and R730xd PCIe riser 1, right

Model Number: 330-BBCR
Dell R730 and R730xd PCIe riser 1, right. Part number 330-BBCR.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: Dell Misc
Manufacturer: Dell
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

The 330-BBCR Dell R730 and R730xd PCIe riser 1 provides slots 1, 2 and 3 in a PowerEdge R730. These are low-profile, half-length slots, each with an x8 link on an x16-wide connector, and all three connect to processor 2. Riser 1 works only when both processors are installed.

When riser 1 is not fitted, a riser 1 blank occupies its position in the chassis, and the blank must stay in place to keep cooling correct. The blank is removed only when riser 1 is going in, by pressing its tabs and pushing it out of the chassis. A system event is logged if a riser is unsupported or missing, without stopping the server from powering on. With the 165 W Intel Xeon E5-2689 v4 processor, using PCIe risers 1 and 3 can result in thermal errors.

Cards are changed with the riser out of the system. After disconnecting the card's cables, press tab A and rotate its latch clockwise, then press tab B and rotate its latch downward, and lift the card out of the riser 1 cage. A permanently removed card leaves a metal filler bracket over the slot opening, and both latches are closed again afterward. The riser itself lifts out of its connector on the system board when held by its slots.

330-BBCR Specs 
ProductDell R730 and R730xd PCIe riser 1
Slots on riserSlots 1, 2 and 3
Card sizeLow-profile, half-length
Linkx8 on each slot
Slot widthx16
Processor connectionProcessor 2
Processors requiredBoth
PCIe generation3
BlankRiser 1 blank fills an unused position
Fitted inPowerEdge R730