Home » Store » HPE » HPE Switch » HPE 2510-24 Switch J9019A

HPE 2510-24 Switch J9019A

HPE 2510-24 Switch, part number J9019A: 24 10/100 ports and 2 dual-personality gigabit ports.

Sourcing mission-critical hardware shouldn't mean gambling on auction sites or automated shopping carts. You get direct access to dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop / Aruba

HPE 2510-24 Switch J9019A
HPE 2510-24 Switch J9019A
HPE 2510-24 Switch J9019A

Home / Shop / Aruba

HPE 2510-24 Switch J9019A

Model Number: J9019A
HPE 2510-24 Switch, part number J9019A: 24 10/100 ports and 2 dual-personality gigabit ports.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: HPE Switch
Manufacturer: HPE
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

J9019A is the HPE 2510-24 switch (E2510-24), the Fast Ethernet model of the 2510 series. It has 24 RJ-45 auto-sensing 10/100 ports with Auto-MDIX and half or full duplex, plus 2 dual-personality ports; each of those can be used as an RJ-45 10/100/1000 port or an open mini-GBIC slot.

Performance figures from HPE are 100 Mb latency under 4.9 µs, up to 6.5 million packets per second and 8.8 Gb/s switching capacity, with an 8,000-entry MAC address table. The processor is a MIPS 32 at 264 MHz with 8 MB flash, 64 MB SDRAM and a 384 KB packet buffer.

It is a low-power 1U unit: the 2510-24 draws 20 W, with a maximum heat dissipation of 71.74 kJ/h, and has no fan (acoustic power 0 dB). It measures 4.39 x 44.25 x 23.62 cm (1.73 x 17.42 x 9.3 in) and mounts in an EIA-standard 19-inch telco rack or cabinet, or on a horizontal surface. It accepts 100-127 or 200-240 V ac at 50/60 Hz.

The rack kit listed against J9019A is 5069-6535: two rack-mounting brackets, eight 8 mm M4 screws for the chassis, four 5/8-inch 12-24 rack screws and four rubber feet.

HPE PartSurfer marks J9019A as no longer supported by HP as of May 31, 2013. HPE's 2013 end-of-sale notice for the 2510 and 2520 series lists J9019B (HP 2510-24 Switch) and names the 2530 series as the replacement family.

The gigabit 2510 models are in the HPE switch category.

Part numberJ9019A
ModelHPE 2510-24 Switch (E2510-24)
Ports24 RJ-45 auto-sensing 10/100
Dual-personality ports2 (RJ-45 10/100/1000 or open mini-GBIC)
Switching capacity8.8 Gb/s
ThroughputUp to 6.5 million pps
MAC address table8,000 entries
Processor and memoryMIPS 32 at 264 MHz, 8 MB flash, 64 MB SDRAM
Power consumption20 W
Dimensions4.39 x 44.25 x 23.62 cm
Voltage100-127 / 200-240 V ac, 50/60 Hz
Rack kit5069-6535
Service parts support endedMay 31, 2013 (HPE PartSurfer)