Home / Shop / Aruba
- Description
- Specifications
The J9449A is the HPE 1810-8G Switch, sold earlier as the HP ProCurve 1810G-8 Switch. HPE's spare for the switch itself is J9449-69001, described as the ProCurve 1810G-8: eight auto-sensing 10/100/1000 ports covering IEEE 802.3 10Base-T, 802.3u 100Base-TX and 802.3ab 1000Base-T, with Auto-MDIX. Duplex is half or full on 10Base-T and 100Base-TX, and full only on 1000Base-T.
HPE says the 1810G-8 is managed through a web-browser interface that can be reached from any PC or workstation on the connected network. In the factory default configuration the switch's IP address is 192.168.2.10 with subnet mask 255.255.255.0, and there is no default password. The Network Setup > Get Connected page sets the IP network configuration, and Maintenance > Save Configuration keeps settings across a reboot.
Power comes from an external adapter: spare 5188-6700 is a separate AC power adapter with an attached DC power cord, taking 100-240 V ac at 50/60 Hz and giving 12 V dc at 1.25 A, and needing a country-specific AC cord with a C7 connector.
Browse more HPE switches if you are matching a unit already in a cabinet.
| Product number | J9449A |
| Name | HPE 1810-8G Switch (ProCurve 1810G-8) |
| Spare switch | J9449-69001 |
| Ports | 8 auto-sensing 10/100/1000 (10Base-T, 100Base-TX, 1000Base-T) |
| Media type | Auto-MDIX |
| Duplex | Half or full on 10/100; full only on 1000 |
| Management | Web-browser interface |
| Default IP address | 192.168.2.10 (255.255.255.0) |
| Spare AC adapter | 5188-6700 (100-240 V ac in, 12 V dc 1.25 A out) |
| Power cord inlet | C7 |

