Home / Shop / Brocade


- Description
- Specifications
XBR-1500WPSAC-F is the 1500 W AC power supply FRU for the Brocade G630 switch, in the version with nonport-side exhaust airflow: it pulls air in at the port side and exhausts it out the nonport side, which is the front-to-back direction carried by part numbers ending -F. It carries a green "E" label. The matching intake version is XBR-1500WPSAC-R.
Input is 100-240 VAC nominal at 50/60 Hz nominal, with a working range of 90-264 VAC and 47-63 Hz. Input current is 7A to 12A, the input is line fused, and inrush current peaks at 40A, so plug-in and plug-out should not be repeated in quick succession. The supply was introduced with Fabric OS 8.2.0 and is supported with Fabric OS 9.x.
A G630 holds two hot-swappable power supplies, and either slot takes either unit. Both must be the same type, airflow direction and part number, otherwise the console shows an error, and the airflow must match the fan assemblies; the exhaust fan assembly is XBR-ENT-FAN-80-F. Each supply has one internal fan, and the switch can run all its ports on one supply if redundancy is not needed.
For the other Brocade chassis parts see the Brocade misc parts category.
| Part number | XBR-1500WPSAC-F |
| Output power | 1500 W |
| Input voltage | 100-240 VAC nominal, 90-264 VAC range |
| Input frequency | 50/60 Hz nominal, 47-63 Hz range |
| Input current | 7A-12A |
| Inrush current | 40A peak |
| Airflow | nonport-side exhaust (front-to-back), green E label |
| Fits | Brocade G630 switch |
| Intake version | XBR-1500WPSAC-R |
| Matching fan | XBR-ENT-FAN-80-F |
| Introduced with | Fabric OS 8.2.0 |
