Home / Shop


- Description
- Specifications
CW9166I-E is the Catalyst 9166I indoor Wi-Fi 6E access point with internal antennas, for the E regulatory domain. The x in the CW9166I-x model number stands for the regulatory domain, and the same hardware is ordered as CW9166I-A, -B, -F, -Q, -R, -Z, -ROW and -MR for other domains.
It is a tri-band access point for 2.4 GHz, 5 GHz and 6 GHz. It has three 4x4 radios, and the dual-band XOR radio can move capacity between 6 GHz and a second 5 GHz radio. A dedicated scanning radio and a Bluetooth Low Energy 5.1 radio make five radios in all. The 6 GHz radio runs at Low Power Indoor levels, and where 6 GHz is not authorized it is disabled and the access point runs as a dual-5 GHz unit. Maximum PHY rates are 1.5 Gbps for 802.11n, 3.4 Gbps for 802.11ac and 7.78 Gbps for 802.11ax. Antenna gain is 3 dBi at 2.4 GHz, 5 dBi at 5 GHz and 4 dBi at 6 GHz.
The uplink is one RJ-45 multigigabit port at 100M, 1G, 2.5G or 5G. The unit also has an RJ-45 console, a USB 2.0 port and a 54 V DC jack. It needs 802.3bt or 802.3at power, drawing a maximum of 30.5 W on 802.3bt and 25.5 W on 802.3at; 802.3af at 14.0 W is enough only for configuration with the radios off. Sensors measure temperature, TVOC and relative humidity.
It measures 9.5 x 9.5 x 2.2 in (241.3 x 241.3 x 56.9 mm) and weighs 3.54 lb (1.60 kg). Operating range is 0 to 50 C, and memory is 2048 MB DRAM with 1024 MB flash.
A sibling Wi-Fi 6E model is the CW9166I-B for the B domain.
| Part number | CW9166I-E |
| Series | Cisco Catalyst 9166 |
| Type | indoor Wi-Fi 6E, internal antennas |
| Regulatory domain | E |
| Bands | 2.4, 5 and 6 GHz |
| Radios | 3 x 4x4 plus scanning and BLE 5.1 |
| Maximum 802.11ax rate | 7.78 Gbps |
| Uplink | 1 x RJ-45 multigigabit (100M/1G/2.5G/5G) |
| Power | 802.3bt or 802.3at (30.5 W / 25.5 W maximum) |
| Dimensions | 9.5 x 9.5 x 2.2 in; weight 3.54 lb (1.60 kg) |
| Operating temperature | 0 to 50 C |
