HPE Networking Instant On 1960 24G 2XGT 2SFP+ Switch

JL806A is the HPE Networking Instant On 1960 24G 2XGT 2SFP+ Switch, the non-PoE 24-port access model of the Instant On 1960 range. It has 24 autosensing 10/100/1000 RJ-45 ports, and for uplinks it adds two 10GBASE-T ports and two SFP+ 10GbE ports. The unit has no fan and runs from an internal power supply.

Switching capacity is 128 Gbps and throughput is 95 Mpps. Latency is under 4.4 microseconds at 100 Mb, under 2.2 at 1000 Mb and under 1.1 at 10000 Mb. The MAC address table holds 16,000 entries, the routing table holds 32 IPv4/IPv6 static entries, and the CPU is a single-core ARM v7 Cortex-A9 at 800 MHz.

Maximum power is 60 W on 100-127 V and 80 W on 200-220 V, with idle draw of 30 W and 40 W. The 1U chassis measures 350.5 x 442.5 x 43.95 mm, weighs 8.7 lb (3.9 kg) and comes with a 2-post rack kit; it can also sit on a table, hang on a wall or mount under a table, top surface up.

Up to four 1960 switches can be stacked and run from one management IP address, through local stacking or through cloud-managed stacking in the Instant On mobile app and web portal, and access and aggregation models can be mixed in one stack. HPE specifies these uplink transceivers and cables for the SFP+ ports: Instant On 1G SFP LC SX R9D16A, 1G SFP RJ45 R9D17A and 10G SFP+ LC SR R9D18A, plus Aruba 1G SFP LC LX J4859D, 10G SFP+ LC LR J9151E and the 10G direct attach cables J9281D (1 m) and J9283D (3 m).

For a version with PoE, the JL809A is the 48-port model with 40 Class 4 and 8 Class 6 PoE ports and a 600 W budget.