Home / Shop


- Description
- Specifications
AIR-ANT2568VG-N is the Cisco Aironet dual-band omnidirectional antenna with an N-male connector. It covers 2400 to 2483 MHz and 5150 to 5925 MHz with 6 dBi of gain on 2.4 GHz and 8 dBi on 5 GHz, and its polarization is vertical.
The pattern is omnidirectional in azimuth with a 2 dB maximum ripple. The elevation 3 dB beamwidth is 24 degrees on 2.4 GHz and 11 degrees on 5 GHz. VSWR is 1.5:1 on 2.4 GHz and 2:1 on 5 GHz, and nominal input impedance is 50 ohms.
The antenna is 14.8 in (377 mm) long and 1.25 in (31.75 mm) in diameter, and it weighs 7.2 oz (204.1 g). It carries an IP67 rating, withstands 100 mph operational wind and 136 mph survival wind, and works from -30 to 70 degrees C.
It connects directly to a dedicated antenna port on a Cisco Aironet outdoor access point. No tools are needed, though a 3/4 in wrench may help remove port covers. Hand-tighten using only the metal knurled ring and never the plastic body. Cisco recommends a coax seal such as CoaxSeal rather than silicone sealant or electrical tape, and suggests mounting 5 to 10 ft (1.5 to 3 m) above the roof line, away from power lines and obstructions.
Related part: AIR-ANT2547VG-N Cisco Aironet Dual-Band Omnidirectional Antenna, N-Type
Related part: AIR-ANT2547V-N Cisco Aironet Dual-Band Omnidirectional Antenna
Related part: AIR-AP1562E-B-K9 Cisco Aironet 1562E Outdoor Access Point
Related part: AIR-AP1572EAC-E-K9 Cisco Aironet 1572EAC Outdoor Access Point
| Bands | 2400 to 2483 MHz, 5150 to 5925 MHz |
| Gain | 6 dBi (2.4 GHz), 8 dBi (5 GHz) |
| Polarization | vertical |
| Pattern | omnidirectional in azimuth |
| Elevation 3 dB beamwidth | 24 degrees (2.4 GHz), 11 degrees (5 GHz) |
| VSWR | 1.5:1 (2.4 GHz), 2:1 (5 GHz) |
| Impedance | 50 ohms |
| Connector | N-male |
| Dimensions | 14.8 in x 1.25 in diameter |
| Weight | 7.2 oz (204.1 g) |
| Ingress protection | IP67 |
| Wind rating | 100 mph operational, 136 mph survival |
