Home / Shop


- Description
- Specifications
MR20-HW is the hardware part number of the Cisco Meraki MR20, a dual-band enterprise-class 802.11ac cloud-managed access point. The package contains the MR20 access point, a mount plate, a mount kit, and wall screws, wall screw anchors and security screws.
It has a Gigabit Ethernet RJ45 port that accepts 802.3at and 802.3af power and is labeled Eth0, PoE. This port is the uplink to the WAN connection. The access point can be powered from the Meraki AC adapter or a PoE injector, which are separate parts, or from a third-party PoE switch, and it operates at full power on 802.3af PoE. Power over Ethernet supports a maximum cable length of 300 ft (100 m).
The mount cradle attaches to a wall, a solid or drop ceiling or an electrical junction box. The access point locks onto two cradle tabs and one Torx security screw, which prevents accidental dislodging and theft. It can also sit on a desk or shelf on non-scratch rubber feet. In a mesh deployment the MR20 needs line of sight to at least two other Meraki devices.
A multi-color front LED reports status: orange during boot, rainbow while initializing, blinking blue during an upgrade, green in gateway mode with no clients and blue in gateway mode with clients. Run Dark mode, enabled from the Meraki dashboard, turns the LED off. Holding the reset button for at least five seconds restores factory settings.
| Designation | MR20 |
| Hardware part number | MR20-HW |
| Type | dual-band enterprise 802.11ac, cloud managed |
| Uplink port | 1 x Gigabit Ethernet RJ45 (Eth0, PoE) |
| PoE | 802.3at and 802.3af, full power on 802.3af |
| Power options | Meraki AC adapter, PoE injector, third-party PoE switch |
| Maximum PoE cable length | 300 ft (100 m) |
| Mounting | mount cradle (wall, ceiling, junction box) or desk/shelf |
| Security | Torx security screw |
| Status LED | multi-color, Run Dark mode |
| Reset | button, 5 seconds |
| Package | AP, mount plate, mount kit, screws and anchors |
