Home / Shop


- Description
- Specifications
4XC7A08240 is the ThinkSystem Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapter, feature code B5T4. It carries four RJ45 ports on a Broadcom BCM57454 controller and runs at 10GBASE-T (IEEE 802.3an) or falls back to 1000BASE-T (802.3ab). The card is built to the OCP NIC 3.0 design, version 0.85, with the primary 4C+ connector, and uses a PCIe 3.0 x16 host interface.
Standard twisted-pair cabling is enough: UTP Cat 7 or Cat 6a reaches 100 m and Cat 6 reaches 55 m, so no transceivers or fibre are needed. The OCP form factor adds Network Controller Sideband Interface (NC-SI) so the server's service processor can share the port, and Wake-on-LAN. Broadcom TruFlow flow processing, RoCEv2, SR-IOV with up to 1K virtual functions, VXLAN, NVGRE and Geneve offloads, and jumbo frames up to 9600 bytes are all part of the controller feature set. PXE and UEFI boot are available, and iSCSI boot works through the server UEFI only.
The adapter measures 76 mm wide and 115 mm deep. Lenovo withdrew it from marketing in June 2025. The PCIe-slot version of the same four-port design is 4XC7A08245, which uses a PCIe 3.0 x8 host interface instead.
| Designation | ThinkSystem Broadcom 57454 10GBASE-T 4-port OCP Ethernet Adapter |
| Feature code | B5T4 |
| Ports | 4x RJ45 10GBASE-T |
| Fallback speed | 1000BASE-T |
| Controller | Broadcom BCM57454 |
| Form factor | OCP 3.0 SFF (NIC 3.0 v0.85) |
| Host interface | PCIe 3.0 x16 |
| Cabling | Cat 7 or Cat 6a to 100 m, Cat 6 to 55 m |
| Management | NC-SI, Wake-on-LAN |
| Dimensions | 76 mm x 115 mm |
