Home / Shop


- Description
- Specifications
4XC7A08278 (feature code BCD5) is the ThinkSystem Intel X710-T2L 10GBASE-T 2-port OCP Ethernet Adapter, an Intel X710 controller with two 10GBASE-T copper ports on an OCP 3.0 small-form-factor card. The OCP card is 76 mm wide and 115 mm deep. Because it is an OCP adapter it supports Wake-on-LAN and NC-SI, so the server's service processor can share the first port for out-of-band management.
Hardware offloads cover VXLAN, NVGRE and GENEVE overlay traffic, plus LSO and checksum offload. Virtualization support includes VMDq for up to 256 VMs, SR-IOV direct assignment with up to 128 virtual functions per device, up to 1.5K hardware queue pairs, VMware NetQueue, Microsoft VMQ and VEPA bridging. Jumbo frames up to 9728 bytes, 1588 time synchronization and Receive Side Scaling are included.
Intel specifies about 7 µs latency through the standard network stack and about 3 µs with kernel bypass. Teaming modes include adapter and switch fault tolerance, adaptive load balancing and IEEE 802.3ad, and UEFI and legacy PXE boot are available. The PCIe-slot version of this adapter is 4XC7A80266 (BNWL). A four-port OCP sibling is the 4XC7A80268 X710-T4L.
| Designation | ThinkSystem Intel X710-T2L 10GBASE-T 2-port OCP Ethernet Adapter |
| Feature code | BCD5 |
| Ports | 2x 10GBASE-T |
| Controller | Intel X710 |
| Form factor | OCP 3.0 SFF |
| Management | NC-SI, Wake-on-LAN |
| Virtualization | VMDq (256 VMs), SR-IOV (128 VFs) |
| Offloads | VXLAN, NVGRE, GENEVE |
| Jumbo frames | 9728 bytes |
| Boot | UEFI and legacy PXE |
| Dimensions | 76 mm x 115 mm |
