Home » Store » Cisco » Cisco Wireless » AIR-AP1815I-E-K9 Cisco Aironet 1815i Access Point

AIR-AP1815I-E-K9 Cisco Aironet 1815i Access Point

Cisco Aironet 1815i indoor dual-band 802.11ac Wave 2 access point with 2x2:2 MIMO, MU-MIMO and one Gigabit PoE port.

Built for end users, business partners, government agencies, and contractors, we replace auction-site guesswork with direct human support. You get dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

AIR-AP1815I-E-K9 Cisco Aironet 1815i Access Point
AIR-AP1815I-E-K9 Cisco Aironet 1815i Access Point
AIR-AP1815I-E-K9 Cisco Aironet 1815i Access Point

Home / Shop

AIR-AP1815I-E-K9 Cisco Aironet 1815i Access Point

Model Number: AIR-AP1815I-E-K9
Cisco Aironet 1815i indoor dual-band 802.11ac Wave 2 access point with 2x2:2 MIMO, MU-MIMO and one Gigabit PoE port.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: Cisco Wireless
Manufacturer: Cisco
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

AIR-AP1815I-E-K9 is the Cisco Aironet 1815i access point, an indoor 802.11ac Wave 2 unit with two simultaneous radios, one on 2.4 GHz and one on 5 GHz. Each radio runs 2x2:2 MIMO with two spatial streams and MU-MIMO, and the antennas are integrated, with 2 dBi gain at 2.4 GHz and 4 dBi gain at 5 GHz.

Data rates reach 867 Mbps on the 5 GHz radio and 144.4 Mbps on 2.4 GHz with 802.11n, for up to 1 Gbps combined across both radios. Each radio handles up to 200 clients and the access point as a whole handles up to 400. The unit carries 1 GB of DRAM, 256 MB of flash and a 710 MHz quad-core processor.

Wired connectivity is one 10/100/1000BASE-T RJ-45 port with PoE plus an RJ-45 console port. Power arrives from 802.3af or 802.3af/at switches or from the AIR-PWRINJ5= and AIR-PWRINJ6= injectors, and maximum draw on PoE is 8.3 W.

The 1815i mounts on a ceiling or wall with the included AIR-AP-BRACKET8 bracket, while the AIR-SEC-50= physical security kit is a separate part. It measures 6 x 6 x 1.3 in (150.8 x 150.8 x 33 mm) and weighs 14 oz (400 g) without the bracket.

It runs on AireOS 8.3.112.0 (8.3MR1) or later and works with Cisco WLAN controllers, the Catalyst 9800 among them. It can also run Cisco Mobility Express with no physical controller, and it works as an Office Extend Access Point. Security covers WPA3, WPA2, WPA, 802.1X, AES and RADIUS AAA.

DesignationAIR-AP1815I-E-K9
Typeindoor access point, 802.11ac Wave 2
Radiosdual-band, 2.4 GHz and 5 GHz
MIMO2x2:2, two spatial streams, MU-MIMO
Data rate867 Mbps (5 GHz), 144.4 Mbps (2.4 GHz, 802.11n)
Antennasintegrated, 2 dBi (2.4 GHz), 4 dBi (5 GHz)
Ethernet1 x 10/100/1000BASE-T RJ-45 with PoE
Power802.3af or 802.3af/at, 8.3 W maximum on PoE
Memory1 GB DRAM, 256 MB flash
Clients200 per radio, 400 per access point
Dimensions6 x 6 x 1.3 in (150.8 x 150.8 x 33 mm)
Weight14 oz (400 g) without bracket
SoftwareAireOS 8.3.112.0 or later, Mobility Express