Home / Shop
- Description
- Specifications
Q2P64B is the HPE 25Gb SFP28 Short Wave Extended Temperature 1-pack Pull Tab Optical Transceiver. It is a 25 Gb/s SR module for multi-mode fiber with an LC duplex connector, built to the 25GBASE-SR standard with a 25GAUI C2M host interface.
The wavelength is 850 nm and the signaling speed is 25.78 Gb/s over one 25 Gb/s NRZ lane on both the host and media sides. Reach is 70 m on OM3 and 100 m on OM4 multi-mode fiber. Transmit power is -8.4 to 2.4 dBm, receive power is -10.3 to 2.4 dBm, and receiver sensitivity is -5.2 dBm. Power consumption is 1 W. The module cannot be broken out.
This is the extended temperature version: the maximum temperature is 85 C. The latch is a pull tab, and the module is supplied as a single transceiver.
Supported fiber cabling is duplex LC multi-mode: the HPE PremierFlex OM4 cables in 1, 2, 5, 15, 30 and 50 m (QK732A to QK737A), the OM5 wide band cables in 100 and 150 m (R9M64A and R9M65A), and the OM3 cables from 0.5 to 50 m (AJ833A to AJ839A). The spare number is P05199-001.
| Designation | HPE 25Gb SFP28 SW E Temp 1-pack PT XCVR |
| Part number | Q2P64B |
| Spare | P05199-001 |
| Speed | 25 Gb/s (25.78 Gb/s signaling) |
| Wavelength | 850 nm |
| Fiber | multi-mode |
| Reach | 70 m (OM3), 100 m (OM4) |
| Connector | LC duplex |
| Latch | pull tab |
| Maximum temperature | 85 C |
| Transmit power | -8.4 to 2.4 dBm |
| Receive power | -10.3 to 2.4 dBm |
| Power consumption | 1 W |
| Media compliance | 25GBASE-SR |