Home » Store » IBM » IBM Interface Card » IBM #EN2W PCIe3 4-port 10GbE BaseT RJ45 Adapter for 9105

IBM #EN2W PCIe3 4-port 10GbE BaseT RJ45 Adapter for 9105

PCIe Gen3 short x8 4-port 10GBASE-T RJ45 Ethernet adapter, full height, for the IBM Power S1022 (9105).

Built for end users, business partners, government agencies, and contractors, we replace auction-site guesswork with direct human support. You get dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

IBM #EN2W PCIe3 4-port 10GbE BaseT RJ45 Adapter for 9105
IBM #EN2W PCIe3 4-port 10GbE BaseT RJ45 Adapter for 9105
IBM #EN2W PCIe3 4-port 10GbE BaseT RJ45 Adapter for 9105

Home / Shop

IBM #EN2W PCIe3 4-port 10GbE BaseT RJ45 Adapter for 9105

Model Number: IBM FC EN2W
PCIe Gen3 short x8 4-port 10GBASE-T RJ45 Ethernet adapter, full height, for the IBM Power S1022 (9105).
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: IBM Interface Card
Manufacturer: IBM
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

IBM feature #EN2W is a PCIe Gen3 short x8 adapter with four 10GBASE-T ports for the IBM Power S1022 (9105-22A). The ports are RJ45 and default to autonegotiate to the highest speed, either 10 Gb (10GBASE-T) or 1 Gb (1000BASE-T) full duplex, with each port configured independently. The adapter supports Ethernet NIC traffic.

10GBASE-T reaches up to 100 meters using CAT6A or better, and 1000BASE-T reaches up to 100 meters using CAT5e, CAT6 or CAT6A.

#EN2W and #EN2X are electronically identical and share the CCIN 2F04. #EN2W has a full high tail stock and #EN2X has a low profile tail stock, so #EN2W needs a full high profile PCIe Gen3 slot.

Port features include NIM install for VIOS, AIX and Linux, IEEE 802.3an, 802.3ab, 802.1p priority, 802.1Q VLAN tagging, 802.3x flow control and 802.3ad LACP, multiple MAC addresses and promiscuous mode for PowerVM/VIOS, MSI-X, interrupt moderation, jumbo frames, LLDP, TCP and UDP checksum offload for IPv4 and IPv6, TCP segmentation offload, RSS and firmware updates. AIX, IBM i and Linux provide software iSCSI support through the adapter.

The minimum is 0 and the maximum is 8, which is also the initial order maximum. Up to 2 #EN2W adapters are allowed per FOM (FC #EMXH or #ENZF) and 4 per expansion drawer FC #EMX0 (with 2x #EMXH) or FC #ENZ0 (with 2x #ENZF). It requires AIX 7.3 or 7.2 with the required service packs, SUSE Linux Enterprise Server 15 SP4, Red Hat Enterprise Linux 8.6 for POWER LE, or Red Hat OpenShift 4.11, each or later; IBM i is supported through VIOS 3.1.4.10 or later.

Feature code#EN2W
DescriptionPCIe3 4-port 10GbE BaseT RJ45 Adapter
CCIN2F04
Host interfacePCIe Gen3 short x8, full high tail stock
PortsFour RJ45, 10GBASE-T / 1000BASE-T
Cable reach100 m (CAT6A or better at 10Gb)
Slot requiredFull high profile PCIe Gen3
Machine type9105 (Power S1022)
Minimum required0
Maximum allowed8 (initial order maximum 8)
Low profile twin#EN2X
CSUYes