Home / Shop
- Description
- Specifications
The 727060-B21 is a dual-port 10 Gb Ethernet adapter in the FlexibleLOM form factor, with two SFP+ cages and 128 MB of integrated memory. It is built for ProLiant rack servers, and the supported-server list covers the DL20, DL360, DL380, DL560 and DL580 Gen9 models, the Apollo 2000 XL170r and XL190r Gen9, the Apollo 4200 Gen9, and the Apollo 6000 XL230a, XL230b and XL250a Gen9 systems.
Each port runs at 20 Gb/s bi-directional, which adds up to 40 Gb/s per adapter, and the card sits on a PCI Express 3.0 x8 interface that also negotiates down to an x4 slot. The network controller is an Emulex XE-102.
The adapter converges Ethernet with storage: one port can carry NIC plus FCoE while the other carries NIC plus iSCSI, and iSCSI boot is supported. For virtualised hosts it offloads VXLAN and NVGRE tunnels, supports SR-IOV, and accepts jumbo frames up to a 9,200-byte MTU.
Power draw is 8.4 W typical and 9.7 W maximum, with an operating temperature range of 0 to 55 degrees C. The SFP+ ports need optics or direct-attach cables bought separately. A factory-integrated version is listed as 732456-B21, and the HPE spare number for this adapter is 764460-001.
Related: FlexFabric 554FLR-SFP+ adapter. More HPE parts are under HPE interface cards.
Related: HPE ProLiant DL20 parts
| Part number | 727060-B21 |
| Ports | 2 x 10Gb SFP+ |
| Form factor | FlexibleLOM |
| Bus | PCI Express 3.0 x8 (negotiates to x4) |
| Bandwidth | 20 Gb/s bi-directional per port, 40 Gb/s per adapter |
| Network controller | Emulex XE-102 |
| Integrated memory | 128 MB |
| Storage protocols | FCoE, iSCSI, iSCSI boot |
| Overlay offload | VXLAN, NVGRE |
| Maximum frame | 9,200 bytes (jumbo) |
| Power | 8.4 W typical, 9.7 W maximum |
| Operating temperature | 0 to 55 C |
| Spare part number | 764460-001 |
| Factory-integrated kit | 732456-B21 |