Home / Shop
- Description
- Specifications
This Cisco supervisor module for Catalyst 6500 chassis carries two 10 Gigabit Ethernet uplink ports built on XENPAK modules, plus one 10/100/1000 RJ-45 port. The part number is also written WS-S32-10GE-PISA, with a hyphen before PISA.
System processor memory is 512 MB of DRAM, upgradeable to 1 GB, alongside 2 MB of NVRAM and 512 MB of bootflash that can also grow to 1 GB. The route processor side has 1 GB of DRAM and 256 MB of bootflash.
Forwarding is rated at up to 15 Mpps for IPv4 services over a 32 Gbps shared-bus backplane, with 2 Gbps of deep packet inspection for NBAR and FPM. PFC3B is onboard, and distributed CEF is not supported. Each 10GE port has a 100 MB buffer with Tx 1p3q8t and Rx 2q8t queues.
It fits any Catalyst 6500 chassis with fan tray 2 or the E-Series fan tray and power supplies of 2500 W or more. Supervisor slots are 1 and 2 in 3- and 4-slot chassis, 5 and 6 in 6- and 9-slot chassis, and 7 and 8 in 13-slot chassis. Minimum software is Cisco IOS 12.2(18)ZY.
| Part number | WS-S32-10GEPISA |
| Uplinks | 2 x 10 Gigabit Ethernet XENPAK + 1 x 10/100/1000 RJ-45 |
| Policy feature card | PFC3B |
| IPv4 forwarding | up to 15 Mpps |
| Backplane | 32 Gbps shared bus |
| Deep packet inspection | 2 Gbps |
| System processor DRAM | 512 MB (upgradeable to 1 GB) |
| Route processor DRAM | 1 GB |
| Buffer per 10GE port | 100 MB |
| Minimum software | Cisco IOS 12.2(18)ZY |