Home / Shop / IBM / SSD (IBM / Lenovo)


- Description
- Specifications
Lenovo spare 02JK753 is the 15.36TB PM1733 Entry model, delivered as a 2.5-inch U.2 NVMe drive with a hot-swap tray. Its Lenovo option number is 4XB7A38284, and the feature code listed alongside that option is BE2F.
Samsung's read-intensive TLC design runs over PCIe 4.0 x4 for up to 7 GBps overall. The host link also falls back to PCIe 3.0 x4 for older platforms. SR-IOV support lets one SSD be divided into as many as 64 virtual workspaces.
Fail-In-Place technology lets the PM1733 spot failing NAND cells and relocate their data while the drive keeps running normally in service. Samsung's power-loss protection architecture and SMART reporting round out the feature list for this large-capacity model.
Measured on a PCIe 4.0 host, this model delivers 1,450,000 random read IOPS and 135,000 random write IOPS with 4 KB blocks. Sequential speeds are 7000 MBps reading and 3500 MBps writing, both measured with 128 KB blocks. Random reads take 100 µs to answer and random writes take 25 µs.
Rated endurance is 28,032 TB of total bytes written, MTBF is 2,000,000 hours, and the read error rate is < 1 in 10^17 bits read. Typical power draw while reading is 20 W, rising to 22 W while the drive is writing, and there is no SED encryption.
Smaller options in the same U.2 family are 4XB7A38196 (1.92TB), 4XB7A38197 (3.84TB) and 4XB7A38283 (7.68TB). All of them share the hot-swap format of 02JK753 and the PM1733 Entry feature set.
| Spare part number | 02JK753 |
| Manufacturer | Lenovo |
| Option number | 4XB7A38284 |
| Feature code | BE2F |
| Type | Solid state drive, hot swap |
| Capacity | 15.36 TB |
| Form factor | 2.5-inch U.2, 15 mm |
| Interface | PCIe 4.0 x4 (backward compatible with PCIe 3.0 x4) |
| Flash | Samsung TLC |
| Endurance | 28,032 TB written |
| Reliability (UBER) | < 1 in 10^17 bits read |
| MTBF | 2,000,000 hours |
| Read / write IOPS (4 KB, PCIe 4.0) | 1,450,000 / 135,000 |
| Sequential read / write (128 KB, PCIe 4.0) | 7000 MBps / 3500 MBps |
| Latency (random read / write) | 100 µs / 25 µs |
| Typical power (read / write) | 20 W / 22 W |
| SED encryption | None |
