Work With Us
Home » Store » Cisco 7200 Series Routers

Cisco 7200 Series Routers

Sourcing mission-critical hardware shouldn't mean gambling on auction sites or automated shopping carts. You get direct access to dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

The Cisco 7200 series routers are modular routers with 2, 4 or 6 port adapter slots: the 2-slot 7202, the 4-slot 7204 and 7204VXR, and the 6-slot 7206 and 7206VXR. The 7204VXR and 7206VXR take the NPE-G1 and NPE-G2. Port adapters fit any open slot and support online insertion and removal, with odd-numbered slots on the left PCI bus and even-numbered slots on the right bus. The front holds an I/O controller in slot 0 with a console port, an auxiliary port, PC Card slots and, on some models, Ethernet, Fast Ethernet or Gigabit Ethernet ports.

The rear holds a network processing engine (NPE) or network services engine (NSE) and up to two 280 W AC or DC power supplies. A router runs on one supply, a second supply of the same type adds hot-swappable load-sharing redundancy, and AC and DC supplies cannot be mixed. Three internal fans sit in one tray. The engines are the NPE-100, NPE-150, NPE-175, NPE-200, NPE-225, NPE-300, NPE-400, NSE-1, NPE-G1 and NPE-G2. The NPE-G1 and NPE-G2 have three Gigabit Ethernet interfaces, and the NPE-G2 adds a Fast Ethernet management port and two USB ports.

The NPE-G2 takes a single SDRAM DIMM of 1 GB or 2 GB, the NPE-G1 takes two SDRAM SODIMMs for 256 MB, 512 MB or 1 GB, and the NPE-400 takes a single SODIMM. Each of the two PCI buses carries 600 bandwidth points on the NPE-G1, NPE-G2, NPE-400, NPE-300 and NSE-1, and the NPE-G1 and NPE-G2 Gigabit Ethernet interfaces use none. The C7200-I/O-GE+E I/O controller needs an NPE-400 or later engine, or an NSE, in a 7204VXR or 7206VXR. The Port Adapter Jacket Card works only with the NPE-G1 or NPE-G2 and adds one port adapter slot, numbered 5 in a 7204VXR and 7 in a 7206VXR.

The VPN Services Adapter, C7200-VSA, requires the NPE-G2, fits the I/O controller slot of a 7204VXR or 7206VXR and needs Cisco IOS Release 12.4(11)T or later, with up to 5000 IPsec tunnels. The SA-VAM and SA-VAM2 modules are not supported on the NPE-150, NPE-175 or NPE-200. Related pages cover the Cisco 3945, Cisco 2951 and Cisco 4431 routers and the Cisco 6509 switch, and the full range is under networking. Routers are also in the Cisco router category.

Request a quote or send us your parts list.

Looking for a specific Cisco 7200 Series Routers part?

Send us the part number and quantity. Quotes reflect real-time availability and part condition. A product specialist reviews each request and replies, typically within minutes during business hours.

    Prefer to call? (231) 287-5244

    No obligation. No spam. We never sell or share your information. Privacy statement

    Cisco 7200 parts we supply

    Router models (5)

    • Cisco 7202: 2-slot router
    • Cisco 7204: 4-slot router
    • Cisco 7204VXR: 4-slot router, takes the NPE-G1 and NPE-G2
    • Cisco 7206: 6-slot router
    • Cisco 7206VXR: 6-slot router, takes the NPE-G1 and NPE-G2

    Network processing engines (10)

    • NPE-G1: Three Gigabit Ethernet interfaces (RJ-45 and GBIC), 7204VXR and 7206VXR only, two SDRAM SODIMMs
    • NPE-G2: Three Gigabit Ethernet interfaces (SFP), Fast Ethernet management port, 2 USB ports, 7204VXR and 7206VXR only, one SDRAM DIMM
    • NPE-400: Single SDRAM SODIMM
    • NPE-300: SDRAM DIMM main memory
    • NPE-225: SDRAM DIMM main memory
    • NPE-175: SDRAM DIMM main memory
    • NPE-200: DRAM SIMM main memory
    • NPE-150: DRAM SIMM main memory
    • NPE-100: DRAM SIMM main memory
    • NSE-1: Network services engine, SDRAM DIMM main memory

    I/O controllers (5)

    • C7200-I/O-GE+E: 1-port Gigabit Ethernet plus Ethernet I/O controller, 7204VXR and 7206VXR with an NPE-400 or later engine or an NSE
    • C7200-I/O-2FE/E: 2-port Fast Ethernet and Ethernet I/O controller, 7204VXR and 7206VXR only
    • C7200-I/O-FE: 1-port Fast Ethernet I/O controller, RJ-45 and MII connectors
    • C7200-I/O-FE-MII: 1-port Fast Ethernet I/O controller, MII connector
    • C7200-I/O: I/O controller without an Ethernet port

    Service adapters (9)

    • C7200-VSA: VPN Services Adapter, needs the NPE-G2, fits the I/O controller slot of a 7204VXR or 7206VXR
    • SA-VAM: VPN Acceleration Module
    • SA-VAM2: VPN Acceleration Module 2
    • SA-VAM2+: VPN Acceleration Module 2+
    • SA-ISA/DES: Integrated Service Adapter, DES
    • SA-ISA/3DES: Integrated Service Adapter, 3DES
    • SA-Encrypt: Data encryption service adapter
    • SA-Comp/1: Compression service adapter
    • SA-Comp/4: Compression service adapter

    Port adapters (selection) (18)

    • PA-2FE-TX: 2-port Fast Ethernet, TX
    • PA-2FE-FX: 2-port Fast Ethernet, FX
    • PA-FE-TX: 1-port Fast Ethernet 100BASE-TX
    • PA-FE-FX: 1-port Fast Ethernet 100BASE-FX
    • PA-8E: 8-port Ethernet 10BASE-T
    • PA-4E: 4-port Ethernet 10BASE-T
    • PA-POS-OC3SMI: 1-port OC-3c POS, single-mode intermediate reach
    • PA-POS-OC3SML: 1-port OC-3c POS, single-mode long reach
    • PA-POS-OC3-MM: 1-port OC-3c POS, multimode
    • PA-A3-OC3MM: Enhanced ATM, OC-3 multimode
    • PA-T3+: 1-port T3+ serial
    • PA-2T3+: 2-port T3+ serial
    • PA-E3: 1-port E3 serial
    • PA-2E3: 2-port E3 serial
    • PA-4T+: 4-port synchronous serial, enhanced
    • PA-8T-V35: 8-port synchronous serial, V.35
    • PA-MC-T3: 1-port multichannel T3
    • PA-MC-2T3+: 2-port multichannel T3
    Request a Quote