Home / Shop
- Description
- Specifications
The WS-C3560E-12SD-E ships with the IP Services license active. IP Services adds full IPv4 routing with OSPF, EIGRP, BGP4 and PIM, hardware-based IP unicast and multicast routing, and policy-based routing. The switch is a 1U stackable multilayer unit with IPv6 support, 12 Gigabit Ethernet SFP ports and 2 10 Gigabit Ethernet X2 ports.
Backplane speed is 68 Gbps and forwarding for 64-byte packets is 47.6 Mpps. Flash is 64 MB. The chassis is 4.45 x 44.5 x 38.1 cm and weighs 7.27 kg, with 44 dB of noise and an MTBF of 206,950 hours.
Two redundant power supplies fit the rear, either 300 W AC (C3K-PWR-300WAC=) or 300 W DC (C3K-PWR-300WDC=), in any AC and DC mix, and each can be swapped one at a time without interrupting service. The fan module is C3K-FAN-16CFM=. The X2 ports accept 10GBASE-ER, LR, SR, LRM, LX4 and CX4 modules, and a Cisco TwinGig converter turns one X2 port into two Gigabit SFP ports. Find more models in Cisco switches.
| Part number | WS-C3560E-12SD-E |
| Product | Cisco Catalyst 3560-E multilayer aggregation switch |
| Ports | 12 x Gigabit Ethernet SFP |
| Uplinks | 2 x 10 Gigabit Ethernet X2 |
| IOS license | IP Services installed |
| Routing | full IPv4 with OSPF, EIGRP, BGP4, PIM |
| Rack size | 1U stackable |
| Backplane | 68 Gbps |
| Forwarding rate | 47.6 Mpps (64-byte packets) |
| Flash | 64 MB |
| Power supplies | dual redundant bays, C3K-PWR-300WAC= or C3K-PWR-300WDC= |
| Dimensions (H x W x D) | 4.45 x 44.5 x 38.1 cm |
| Weight | 7.27 kg |
| MTBF | 206,950 hours |
| Compatible with | C3K-PWR-300WAC= and C3K-PWR-300WDC= power supplies; C3K-FAN-16CFM= fan module; Cisco TwinGig converter; X2 modules 10GBASE-ER, LR, SR, LRM, LX4, CX4 |