Home / Shop
- Description
- Specifications
The Cisco MDS 9700 Series Supervisor 1E, ordered as DS-X97-SF1E-K9, carries two quad-core Intel Xeon processors at 2.13 GHz, 32 GB of DDR3 memory and 2 MB of battery-backed NVRAM, under a 64-bit kernel. It needs Cisco NX-OS Software Release 7.3 or later.
The module is for the MDS 9718 Multilayer Director, which takes up to 768 autosensing 2/4/8-Gbps, 4/8/16-Gbps or 10-Gbps Fibre Channel ports at line rate, and up to 48 Tbps of Fibre Channel system bandwidth. It runs with the DS-X9718-FAB1 crossbar fabric modules, and mixing in other supervisor types is allowed only during a migration.
The front panel has one RS-232 RJ-45 console port, one 10/100/1000 Ethernet management port and two USB 2.0 ports, with eight indicator LEDs including supervisor ID, active supervisor and Slot 0 activity. Flash is USB-based, and the connectivity management processor is not supported. The unit measures 2.04 x 7.94 x 21.85 in (5.18 x 20.17 x 55.5 cm), weighs 8.5 lb (3.86 kg) and draws 265 W maximum, 160 W typical. The spare number is DS-X97-SF1E-K9=. Line cards for the chassis are in Cisco interface cards; other parts are in Cisco switches.
| Part number | DS-X97-SF1E-K9 |
| Type | Cisco MDS 9700 Series Supervisor 1E |
| Processor | Intel Xeon, 2 quad cores, 2.13 GHz, 64-bit kernel |
| Memory | 32 GB DDR3; 2-MB NVRAM with battery backup |
| Software | Cisco NX-OS Software Release 7.3 or later |
| Interfaces | 1 RS-232 RJ-45 console port; 1 10/100/1000 Ethernet management port; 2 USB 2.0 ports |
| Fibre Channel ports supported | Up to 768 per MDS 9718 |
| System bandwidth | Up to 48 Tbps per MDS 9718 |
| Dimensions | 2.04 x 7.94 x 21.85 in (5.18 x 20.17 x 55.5 cm) |
| Weight | 8.5 lb (3.86 kg) |
| Power | 265 W maximum; 160 W typical |
| Spare number | DS-X97-SF1E-K9= |
| Compatible with | Cisco MDS 9718 Multilayer Director |