Home » Store » Cisco » Cisco Interface Card » NM-1VSAT-GILAT Cisco IP VSAT Satellite WAN Network Module

NM-1VSAT-GILAT Cisco IP VSAT Satellite WAN Network Module

Cisco IP VSAT satellite WAN network module with two coaxial connectors, Ku-band and C-band support and Gilat SkyEdge hub compatibility.

Sourcing mission-critical hardware shouldn't mean gambling on auction sites or automated shopping carts. You get direct access to dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

NM-1VSAT-GILAT Cisco IP VSAT Satellite WAN Network Module
NM-1VSAT-GILAT Cisco IP VSAT Satellite WAN Network Module
NM-1VSAT-GILAT Cisco IP VSAT Satellite WAN Network Module

Home / Shop

NM-1VSAT-GILAT Cisco IP VSAT Satellite WAN Network Module

Model Number: NM-1VSAT-GILAT
Cisco IP VSAT satellite WAN network module with two coaxial connectors, Ku-band and C-band support and Gilat SkyEdge hub compatibility.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Manufacturer: Cisco
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

The NM-1VSAT-GILAT is the Cisco IP VSAT Satellite WAN Network Module, an indoor unit in network module form that adds two-way broadband satellite connectivity to a Cisco router for WAN backup, IP multicast and broadband internet access. The spare ordering number is NM-1VSAT-GILAT=.

The module supports Ku-band and C-band frequencies and works with satellite services that use Gilat SkyEdge hub systems. Receive speeds run from 340 Kbps to 10 Mbps and transmit speeds from 60 Kbps to 1.3 Mbps, and unicast traffic from the hub to the remote site is protected with 128-bit AES encryption.

Two coaxial connectors pass transmit and receive signals to the outdoor unit, and a power connector feeds it. The module needs a satellite kit with a dish antenna, an outdoor unit power supply and cables. It is single-wide, measures 1.60 x 7.10 x 7.2 inches (4.1 x 18.0 x 18.3 cm) and weighs up to 0.75 pounds (0.34 kg). Six LEDs report enable, Rx lock, sync lock, on line, transmit and external power status.

Supported platforms are the Cisco 3800, 3700, 2800, 2691 and 2600XM series, excluding the 2801, with Cisco IOS 12.3(14)T or later. The 2800 series includes the CISCO2811 integrated services router. More WAN modules are in Cisco interface cards.

Part numberNM-1VSAT-GILAT
TypeIP VSAT satellite WAN network module (indoor unit)
Spare numberNM-1VSAT-GILAT=
Frequency bandsKu-band, extended Ku-band, C-band, extended C-band
Outbound carrierDVB-S; QPSK or 8PSK; 340 Kbps to 66 Mbps carrier speeds
Inbound carrierTDMA, FDMA, DAMA; GMSK and MSK; 60 Kbps to 1.3 Mbps
Receive speed340 Kbps to 10 Mbps
Transmit speed60 Kbps to 1.3 Mbps
Connectors2 coaxial (transmit, receive); 1 power connector for the outdoor unit
Form factorSingle-wide network module slot (or larger)
Dimensions (H x W x D)1.60 x 7.10 x 7.2 in. (4.1 x 18.0 x 18.3 cm)
Weight0.75 lb (0.34 kg) maximum
Router softwareCisco IOS 12.3(14)T or later
Satellite serviceGilat SkyEdge hub systems
Compatible withCisco 3800, 3700, 2800 (excluding 2801), 2691 and 2600XM series routers