Home / Shop


- Description
- Specifications
Two RJ-48C T1 ports, marked CTRLR T1 0 and CTRLR T1 1 on the faceplate, make the VWIC-2MFT-T1 a Cisco 2-port T1 multiflex trunk voice and WAN interface card. The integrated CSU/DSU lets the card act as a T1 trunk for voice and data, or as fractional n x 64-kbps service for Frame Relay and leased-line WANs.
Supported platforms are the Cisco 1800 series (modular), the 2800 series, the 3800 series and the ICS 7750. Cabling is one straight-through RJ-48C cable from each port to a T1 wall jack. Three LEDs mark loopback (LP), alarm (AL) and carrier detect (CD): LP and AL stay off in normal operation, and CD stays on.
Timing slips can occur if both ports are set as clock source line with different clock sources. The drop-and-insert model is the VWIC-2MFT-T1-DI, the 1-port card is the VWIC-1MFT-T1, and the 2-port E1 card is the VWIC-2MFT-E1. More voice and WAN cards are in Cisco interface cards.
| Part number | VWIC-2MFT-T1 |
| Type | 2-port T1 RJ-48 multiflex trunk voice/WAN interface card |
| Ports | 2 x T1, RJ-48C (CTRLR T1 0, CTRLR T1 1) |
| CSU/DSU | Integrated |
| Services | Voice and data trunk; fractional n x 64 kbps WAN |
| Cable | Straight-through RJ-48C to RJ-48C |
| LEDs | LP (yellow), AL (yellow), CD (green) |
| Clocking rule | Both ports on clock source line must share one clock source |
| Drop-and-insert model | VWIC-2MFT-T1-DI |
| Related cards | VWIC-1MFT-T1, VWIC-2MFT-E1 |
| Compatible with | Cisco 1800 series (modular), 2800 series, 3800 series, ICS 7750 |
