Home / Shop


- Description
- Specifications
The SPA-24CHT1-CE-ATM is a Cisco shared port adapter with 24 channelized T1/E1/J1 ports for circuit emulation over packet and ATM service. One 100-pin connector serves all 24 ports, and the CABLE-24T1E1 cable breaks it out to two 50-pin Telco connectors for a patch panel.
For circuit emulation the SPA transports T1/E1 and nxDS0 traffic as SAToP or CESoPSN over IP/MPLS. The dejitter buffer is configurable up to 320 milliseconds, payload size runs from 1 byte to 1312 bytes, and clock recovery can be synchronous, differential or adaptive. For ATM it supports CBR, VBR-rt, VBR-nrt, UBR and UBR+ classes, per-VC and per-VP shaping, IMA, and up to 2,000 virtual circuits.
The SPA is single height, weighs 0.75 lb (0.34 kg), measures 6.75 in. (17.15 cm) wide by 7.28 in. (18.49 cm) deep and 0.8 in. (2.03 cm) high, and uses 20 W. It supports online insertion and removal. Cisco 7600 Series, XR 12000 Series and ASR 1000 Series routers (CE mode only) take it, and the ASR 9000 Series needs IOS XR 4.3.0 and hardware revision 1.0 as minimums. Related cards and modules are in Cisco interface cards.
| Part number | SPA-24CHT1-CE-ATM |
| Type | Shared port adapter, circuit emulation over packet and ATM |
| Ports | 24 channelized T1/E1/J1 |
| Connector | One 100-pin; CABLE-24T1E1 splits it to two 50-pin Telco connectors |
| Dejitter buffer | Up to 320 ms |
| ATM virtual circuits | 2,000 maximum |
| Height | Single height |
| Weight | 0.75 lb (0.34 kg) |
| Dimensions (W x D x H) | 6.75 x 7.28 x 0.8 in. (17.15 x 18.49 x 2.03 cm) |
| Power | 20 W |
| Minimum on ASR 9000 | IOS XR 4.3.0, hardware revision 1.0 |
| Compatible with | Cisco 7600 Series, XR 12000 Series and ASR 1000 Series (CE mode only) routers |
