Home » Store » HPE » HPE Misc » J8696A ProCurve 620 Redundant and External Power Supply

J8696A ProCurve 620 Redundant and External Power Supply

ProCurve 620 RPS/EPS: redundant and external PoE power supply for 3500yl and 6200yl switches, two RPS and two EPS ports.

Built for end users, business partners, government agencies, and contractors, we replace auction-site guesswork with direct human support. You get dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

J8696A ProCurve 620 Redundant and External Power Supply
J8696A ProCurve 620 Redundant and External Power Supply
J8696A ProCurve 620 Redundant and External Power Supply

Home / Shop

J8696A ProCurve 620 Redundant and External Power Supply

Model Number: J8696A
ProCurve 620 RPS/EPS: redundant and external PoE power supply for 3500yl and 6200yl switches, two RPS and two EPS ports.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Categories: HPE Misc
Manufacturer: HPE
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

The ProCurve 620 Redundant and External Power Supply (J8696A), shortened to 620 RPS/EPS, is an accessory for the Series 3500yl and 6200yl switches and certain other ProCurve switches. It supplies two kinds of power: redundant power that backs up a switch's internal supply, and external Power over Ethernet power for up to two switch products.

As a redundant supply it can back up two switches at once. The unit monitors the power signal from each switch over the RPS cable; when that signal is no longer detected, it turns on and provides power to the switch within 1 millisecond. It has two RPS ports, and each can provide redundant +12V power to a connected switch.

For PoE it has two EPS ports, and it can provide a maximum of 398 watts of PoE power to each of them. On a Switch 3500yl-48G-PWR the external PoE power is additional power made available to the switch ports. If maximum PoE power is used on all 48 ports, a 620 RPS/EPS is necessary just to provide full power to the second 24 ports, and in that case there is no redundancy.

Connection rules: the RPS cable can be hot plugged, but hot disconnect of the EPS (PoE power) cable is not supported and could cause loss of power to the switch. Power the unit down before unplugging an EPS cable while power is flowing. A switch with no AC power that is connected to an operating 620 RPS/EPS will not receive power; power the switch on first, then connect it. The supplied RPS and EPS cables are identical and 2.00 meters (6.56 feet) long. The unit is unmanaged and reports status only through LEDs, which are repeated on the front and back.

Related part: J9625A HPE 2620-24-PoE+ Switch

Related part: J9627A HPE 2620-48-PoE+ Switch

ModelJ8696A
ProductProCurve 620 Redundant and External Power Supply (620 RPS/EPS)
TypeRedundant and external PoE power supply
RPS ports2 (+12V redundant power)
EPS ports2
PoE power per EPS port398 W maximum
Switchover timewithin 1 millisecond
Cables suppliedRPS and EPS cables, 2.00 m (6.56 ft)
Managementunmanaged, LED status
Works withProCurve Series 3500yl and 6200yl switches