Home / Shop / HPE / 3PAR StoreServ (HPE)


- Description
- Specifications
HPE PartSurfer describes 810760-001 as a 1.8TB SAS hard drive that spins at 10K rpm, with a 12Gb/s transfer rate, in the 2.5-inch small form factor (SFF). The drive carries 3PAR drive model HCBF1800S5xeN010, and HPE restricts it to one platform: its description reads "For use with 3PAR 8000".
It is the spare part number inside option K2P94B, the HPE 3PAR 8000 1.8TB SAS 10K SFF (2.5in) HDD with All-inclusive Single-System Software, and inside K2P94A, the HPE 3PAR StoreServ 8000 1.8TB SAS 10K SFF hard drive. PartSurfer lists 810760-001 in the spare-parts table of both options.
HPE now marks 810760-001 as end of life and names 840460-001 (3PAR model STHB1800S5xeN010) as the alternate spare, on the condition that the array meets the minimum 3PAR OS level in HPE customer advisory a00022399en_us. PartSurfer also shows K2P94B and K2P94A as no longer supported by HPE as of August 31, 2026, after which HPE service parts may not be available.
To confirm fit, check that the system is a 3PAR 8000 and that the drive being replaced is labelled 810760-001 or HCBF1800S5xeN010. Where the array already meets HPE's OS minimum, 840460-001 is the same-capacity alternate HPE lists; for 1.2TB in the same 10K SFF format the spare is 810759-001, and the other 8000-series drives are on the 3PAR StoreServ (HPE) hub.
| 810760-001 Specs | |
| Part number | 810760-001 (810760001) |
| Option kits | K2P94B (with All-inclusive Single-System Software), K2P94A |
| Drive model | HCBF1800S5xeN010 |
| Capacity | 1.8TB |
| Interface | SAS, 12Gb/s |
| Rotational speed | 10K rpm |
| Form factor | 2.5-inch SFF |
| Fits | HPE 3PAR 8000 (StoreServ 8000) only |
| Lifecycle | EOL spare; HPE alternate 840460-001 (STHB1800S5xeN010), minimum 3PAR OS per advisory a00022399en_us |
| HPE support end (K2P94B, K2P94A) | Aug 31, 2026 |
