Home / Shop / HPE / Drives SSD (HPE)
- Description
- Specifications
731034-B21 is the HP 960GB 6G SATA 2.5in VE NHP SSD. Its spare, 731044-001, is described in PartSurfer as a 960GB non-hot-plug SSD with a SATA interface, 6Gb/sec transfer rate and 2.5in small form factor.
Non-hot-plug (NHP) drives cannot be swapped while the server is running. HPE's SSD QuickSpecs add that non-hot-plug devices are 15mm Z-height, which limits them to servers that accept a 15mm device.
The spare's where-used list points to HP Moonshot: the Moonshot m301x45 system and a ProLiant Moonshot special server cartridge. If you are replacing a drive in a Moonshot cartridge, 731044-001 is the number to match.
HPE's SSD QuickSpecs say lifetime remaining is reported by SmartSSD Wear Gauge, provided ACU or ADU is running against a supported HPE controller. HPE's retention figure applies at end of life: 3 months with no power once maximum rated write endurance has occurred.
Fit check: 789163-B21 is a later 960GB Read Intensive non-hot-plug drive, and 734526-B21 is the special 2.5-inch VE drive in an SC carrier.
| 731034-B21 Specs | |
| Option | 731034-B21 |
| Spare | 731044-001 |
| Capacity | 960GB |
| Interface | SATA, 6Gb/s |
| Form factor | 2.5-inch SFF |
| Endurance | value endurance (VE) |
| Mounting | non-hot-plug (NHP) |
| Z-height | 15mm (HPE NHP SSD note) |
| Used in | HP Moonshot m301x45 |