The Cisco Meraki MR56 is a cloud-managed 802.11ax access point with an 8×8:8 radio on 5 GHz and a 4×4:4 radio on 2.4 GHz. Cisco rates those two radios at up to 4,804 Mbps and 574 Mbps, for an aggregate frame rate of up to 5.38 Gbps. A third radio handles WIDS/WIPS and RF scanning, and a fourth is a Bluetooth Low Energy radio for beaconing and scanning. Cisco’s capabilities table for access points puts the MR56 in the Wi-Fi 6, 802.11ax group, without 6 GHz.
The uplink is a single multigigabit RJ45 port, 100/1000/2.5G/5G BASE-T, marked Eth0, PoE. Power is 802.3at PoE at 42.5 to 57 V with a 30 W maximum, or a 12 V DC input on a 5.5 mm by 2.5 mm connector, and the AC adapter and injector are sold separately. An access point wired to the LAN needs a routable IP address, either from DHCP or set on the AP’s local page, and Cisco’s ordering information adds that a Meraki access point license is required.
The cradle carries the MR56 on a wall, a solid ceiling, a drop-ceiling T-rail or an electrical junction box, and the rubber feet allow a desk or shelf. Two security screw options are supplied with a Kensington lock point for anchoring. The accessory table has MA-MNT-MR-14, a mounting kit shared with the MR55, and MA-MNT-CLG-1, a T-rail kit with deep-drop ceiling clips. MA-UMNT-MR-A2 is the adapter for the Cisco universal bracket and MA-UMNT-MR-A3 is the one for the Aruba bracket. MA-PWR-30W-US is the AC adapter, and MA-INJ-6 is a multigigabit 802.3bt injector.
Licensing is separate from the hardware. Cisco’s MR License Guide calls MR licenses model-agnostic, with MR Enterprise terms running from LIC-ENT-1YR to LIC-ENT-10YR. For other wireless gear, the Cisco Meraki MR42 page covers an 802.11ac Meraki model and the Cisco 9120 page is the Catalyst 9120AX Wi-Fi 6 family. Browse the whole networking section, or open the Cisco wireless category for access points.
Request a quote or send us your parts list.
Looking for a specific Cisco Meraki MR56 Access Point part?
Send us the part number and quantity. Quotes reflect real-time availability and part condition. A product specialist reviews each request and replies, typically within minutes during business hours.
Prefer to call? (231) 287-5244
No obligation. No spam. We never sell or share your information. Privacy statement
Cisco Meraki MR56 parts we supply
MR56 access point (1)
- MR56-HW: MR56 Wi-Fi 6 indoor access point
Power and injectors (2)
- MA-PWR-30W-US: Meraki AC adapter for MR access points
- MA-INJ-6: Multigigabit 802.3bt PoE injector
Mounting hardware (4)
- MA-MNT-MR-14: Mounting kit for MR55 and MR56: replacement mount plate, drop ceiling clips, security screw tool and screws
- MA-MNT-CLG-1: T-rail mount kit with two deep-drop ceiling clips and a T-rail adapter
- MA-UMNT-MR-A2: Cisco universal mounting adapter
- MA-UMNT-MR-A3: Aruba universal mounting adapter
MR Enterprise licenses (model-agnostic) (5)
- LIC-ENT-1YR: MR Enterprise license, 1 year
- LIC-ENT-3YR: MR Enterprise license, 3 years
- LIC-ENT-5YR: MR Enterprise license, 5 years
- LIC-ENT-7YR: MR Enterprise license, 7 years
- LIC-ENT-10YR: MR Enterprise license, 10 years
