The Dell PowerEdge R510 is a 2U rack server with two processor sockets, from the eleventh generation of PowerEdge, and uses the Intel 5500 chipset. It takes Intel Xeon 5500 and 5600 series processors with 4 MB, 8 MB or 12 MB of cache. Dell’s supported processor table runs from the X5670 at 2.93 GHz to the E5503 at 2.00 GHz, and includes the X5650, E5640, L5640 and L5520. Dell offers the R510 with a 4, 8 or 12 drive chassis.
Memory is DDR3 ECC in 8 DIMM slots, registered or unbuffered, in 1, 2, 4, 8 and 16 GB sizes for up to 128 GB. The 8 and 16 GB RDIMMs go in the 8 and 12 drive chassis only. With one processor installed the system runs 4 DIMMs, up to 64 GB. Speeds of 800, 1066 and 1333 MT/s depend on the processor, and low-voltage DIMMs need a 5600 series processor.
Storage is four cabled 3.5-inch drives in the 4 drive chassis, up to eight hot-swap 2.5-inch or 3.5-inch SAS, SATA or SSD drives in the 8 drive chassis, and up to twelve in the 12 drive chassis plus two internal cabled 2.5-inch drives. Internal controllers are the SAS 6/iR, PERC 6/i, PERC H200 and PERC H700, with software PERC S100 and S300 options. External options are the PERC H800, PERC 6/E, SAS 5/E HBA, 6Gb/s SAS HBA and LSI2032 SCSI HBA. Expansion is three PCIe 2.0 slots, one x8 and two x4, plus one x4 storage slot.
Add-in networking includes the Intel X520 DA2 10 Gb adapter, Intel Gigabit ET dual-port and quad-port adapters and the Broadcom NetXtreme II 57711. A BMC with IPMI 2.0 is standard, and iDRAC6 Express, iDRAC6 Enterprise and vFlash media are optional. Power runs from a 480 W supply in the 4 drive chassis to hot-plug 750 W and 1100 W supplies in the larger chassis. ReadyRails sliding rails with an optional cable management arm and static rails cover rack mounting.
Other Dell families on this site include the R610, R620, R710, R720 and 2950, with the T310, R810 and R820 alongside. The full range sits under Servers, and more Dell server parts are on the Dell PowerEdge server parts page.
Request a quote or send us your parts list.
Looking for a specific Dell PowerEdge R510 part?
Send us the part number and quantity. Quotes reflect real-time availability and part condition. A product specialist reviews each request and replies, typically within minutes during business hours.
Prefer to call? (231) 287-5244
No obligation. No spam. We never sell or share your information. Privacy statement
PowerEdge R510 parts we supply
Processors (2)
- X5650: Intel Xeon X5650 6-core 2.66 GHz 12 MB processor, LGA1366
- E5640: Intel Xeon E5640 4-core 2.66 GHz 12 MB processor, LGA1366
Storage controllers (3)
- H200: PERC H200 6Gb/s SAS RAID controller
- 341-5729: PERC 6/i integrated SAS/SATA RAID controller
- 341-5842: PERC 6/E SAS RAID controller, 2×4 external connectors, 256MB cache
Network adapters (1)
- 942V6: Intel X520-DA2 dual-port 10Gb PCI-E 2.0 x8 Ethernet server adapter
Other options (12)
- PERC H700: Internal 6Gb/s RAID controller
- PERC H800: External 6Gb/s RAID controller
- SAS 6/iR: Internal SAS HBA
- PERC S100 and S300: Software RAID controllers
- SAS 5/E: External SAS HBA
- LSI2032: PCIe SCSI HBA
- Broadcom NetXtreme II 57711: Dual-port 10Gb direct attach Ethernet card with TOE and iSCSI offload
- Intel Gigabit ET: Dual-port and quad-port Gigabit Ethernet adapters
- iDRAC6 Express and iDRAC6 Enterprise: Remote management options
- vFlash media: Virtual flash card for iDRAC6 Enterprise
- 480 W, 750 W and 1100 W power supplies: Non-redundant and hot-plug redundant options
- ReadyRails: Sliding rails with optional cable management arm, and static rails
More Dell hardware is in the Dell processors, Dell interface cards and Dell memory categories.
