Home / Shop
- Description
- Specifications
The 330-BBCR Dell R730 and R730xd PCIe riser 1 provides slots 1, 2 and 3 in a PowerEdge R730. These are low-profile, half-length slots, each with an x8 link on an x16-wide connector, and all three connect to processor 2. Riser 1 works only when both processors are installed.
When riser 1 is not fitted, a riser 1 blank occupies its position in the chassis, and the blank must stay in place to keep cooling correct. The blank is removed only when riser 1 is going in, by pressing its tabs and pushing it out of the chassis. A system event is logged if a riser is unsupported or missing, without stopping the server from powering on. With the 165 W Intel Xeon E5-2689 v4 processor, using PCIe risers 1 and 3 can result in thermal errors.
Cards are changed with the riser out of the system. After disconnecting the card's cables, press tab A and rotate its latch clockwise, then press tab B and rotate its latch downward, and lift the card out of the riser 1 cage. A permanently removed card leaves a metal filler bracket over the slot opening, and both latches are closed again afterward. The riser itself lifts out of its connector on the system board when held by its slots.
| 330-BBCR Specs | |
| Product | Dell R730 and R730xd PCIe riser 1 |
| Slots on riser | Slots 1, 2 and 3 |
| Card size | Low-profile, half-length |
| Link | x8 on each slot |
| Slot width | x16 |
| Processor connection | Processor 2 |
| Processors required | Both |
| PCIe generation | 3 |
| Blank | Riser 1 blank fills an unused position |
| Fitted in | PowerEdge R730 |

