Home / Shop


- Description
- Specifications
The Dell PERC H730P RAID controller, 2GB NV cache, mini card, 405-AANT, is the mini monolithic form of the H730P. The H730P and H730 mini monolithic cards share one layout: a heat sink over the RAID chip, a battery carrier, a battery cable and a SAS cable connector. The chip is a Dell SAS RAID-on-Chip with the LSI 3108 chipset and eight ports.
Cache is 2 GB of DDR3 at 1866 MHz, non-volatile and protected by the battery. The battery sits in a carrier that is held to the card by three tabs and seated on two pins; replacing it means shutting the system down, removing the card, disconnecting the battery cable, pulling the carrier free and clicking the new battery into place before refitting the card.
The card offers RAID 0, 1, 5, 6, 10, 50 and 60, up to 64 virtual disks and 16 virtual disks per disk group, hot-swap support, dedicated and global hot spares, online capacity expansion and a non-RAID mode. Supported drives are 3 Gbps SATA, 6 Gbps SATA and SAS, and 12 Gbps SAS, and the host link is PCIe Gen 3.
Virtual disk migration is supported from PERC H710, H710P and H810 controllers and between PERC 9 cards, while moving disks to older PERC generations is not supported. The H730P can also run in HBA mode, where it hands all drives to the operating system and no virtual disks exist, and it supports consistency checks and background initialization for RAID virtual disks.
Related: Dell PERC H310 and H730 parts
| 405-AANT Specs | |
| Controller | Dell PERC H730P |
| Form factor | Mini monolithic card |
| Processor | Dell SAS RAID-on-Chip, 8-port, LSI 3108 |
| Cache | 2 GB DDR3 1866 MHz, non-volatile |
| Battery backup unit | Yes, in a battery carrier |
| RAID levels | 0, 1, 5, 6, 10, 50, 60 |
| Drive types | 3 Gbps SATA, 6 Gbps SATA/SAS, 12 Gbps SAS |
| Host interface | PCIe Gen 3 |
| Maximum virtual disks | 64 (16 per disk group) |
| Queue depth | 928 |
| Personality modes | RAID mode, HBA mode |
