Home / Shop


- Description
- Specifications
4Y37A09750 is the ThinkSystem M.2 NVMe 2-Bay RAID Adapter, feature code B8P9, also called the M.2 NVMe 2-Bay RAID Enablement Kit. It takes one or two NVMe M.2 drives, and the drives are not hot-swap. Drive lengths of 42, 60, 80 and 110 mm are supported (2242, 2260, 2280 and 22110). SATA M.2 drives are not supported on this adapter.
RAID comes from an onboard Marvell 88NR2241 NVMe RAID controller. With one drive installed it runs a single-drive RAID-0. With two drives it can run a 2-drive RAID-0, a 2-drive RAID-1, or two single-drive RAID-0 arrays.
The adapter connects to the server over a PCIe 3.0 x2 host interface with a PCIe 3.0 x1 link to each drive. Configuration and management go through UEFI and operating-system-based tools. The controller reports events and temperature through I2C, and firmware updates use Lenovo firmware update tools.
SED drive encryption is not supported on this adapter.
Lenovo builds the same M.2 family in a SATA-only RAID form as the 4Y37A09739 (B5XH, Marvell 88SE9230) and in a non-RAID SATA/NVMe form as the 4Y37A09738 (B5XJ).
| Part number | 4Y37A09750 |
| Feature code | B8P9 |
| Drives supported | 1 or 2 M.2 NVMe |
| Hot-swap | No |
| M.2 lengths | 2242, 2260, 2280, 22110 |
| RAID controller | Marvell 88NR2241 NVMe RAID |
| RAID levels | single-drive RAID-0; with 2 drives RAID-0 or RAID-1 |
| Host interface | PCIe 3.0 x2 |
| Drive link | PCIe 3.0 x1 per drive |
| SATA M.2 | Not supported |
| SED encryption | Not supported |
| Monitoring | events and temperature via I2C |
