Home / Shop


- Description
- Specifications
68M95 is a Dell rack network daughter card (rNDC) with four 10 GbE SFP+ ports on Intel's X710 controller. Dell's white paper on network adapters and iDRAC with Lifecycle Controller lists it as the Intel X710 rNDC, 4 x 10G SFP+, and it also appears in Dell's list of adapters covered by iDRAC SFP optical transceiver inventory and monitoring over NC-SI.
An rNDC is not a PCIe card: it plugs into the dedicated network daughter card slot on 14th-generation and earlier PowerEdge rack servers, so it provides the server's built-in LOM ports without using a PCIe slot. The R640, for example, has a dedicated rNDC slot alongside its PCIe slots. It will not fit the OCP 3.0 slot on 15th-generation servers such as the R650.
In the same white paper, Dell lists other X710 options: Y5M7N and 5N7Y5 are the 2 x 10 Gb PCIe adapter, DDJKY the 4 x 10 Gb PCIe adapter, and DX69G a 2 x 10 Gb blade (bNDC) card. If you need four SFP+ ports in a PCIe slot instead of the rNDC slot, DDJKY is the equivalent.
The SFP+ cages take 10 Gb transceivers or direct-attach cables. Because iDRAC can inventory the optics on this card, Dell-supported transceivers show up in the iDRAC hardware inventory.
To confirm fit, check that your server has an rNDC slot and that its technical guide lists an Intel X710 4 x 10 Gb SFP+ rNDC, and match the Dell part number on the card label.
More from this family: Dell Interface Card.
| 68M95 Specs | |
| Dell part number | 68M95 |
| Form factor | rNDC (rack network daughter card) |
| Controller | Intel X710 |
| Ports | 4 x 10 GbE |
| Port type | SFP+ |
| iDRAC | SFP transceiver inventory and monitoring over NC-SI |
| Fits | Servers with an rNDC slot (e.g. PowerEdge R640) |
| Not for | OCP 3.0 slots |
| X710 siblings | 5N7Y5 / Y5M7N (2 x 10 Gb PCIe); DDJKY (4 x 10 Gb PCIe); DX69G (bNDC) |
