Home / Shop
- Description
- Specifications
This 10-core Xeon E5-2650v3 processor kit for the XL450 Gen9 server node of the Apollo 4500 System runs at a 2.3 GHz base clock with 25 MB of L3 cache and a 105 W rating. Among the 13 v3 kits offered for this node only one other kit has ten cores, a 2.6 GHz version with the same cache and the same 105 W, while every kit below it drops to eight cores and 20 MB or less.
A node takes up to two processors, and mixing different processor models inside one node is not supported. Each socket owns eight DIMM slots, so a two-processor node fills all 16 slots, spread over four memory channels per socket with two DIMMs on each channel.
DDR4 on this processor can run at 2133 MHz, the native rate of the HPE SmartMemory registered and load-reduced modules for the v3 range. The 8-core 2.4 GHz and 2.6 GHz kits cannot reach it and stop at 1866 MHz.
Spare 762448-001 is the E5-2650v3 processor itself, and spare 800377-001 is the 49-fin heat sink used in the XL450 node. The chip fits the FCLGA 2011-3 socket and its QPI link runs at 9.6 GT/s.
Related part: 799581-B23 HPE Apollo 4530 Gen9 Configure-to-Order Chassis
| Part number | 783932-B21 |
| Processor | Intel Xeon E5-2650v3 |
| Base frequency | 2.3 GHz |
| Cores | 10 |
| L3 cache | 25 MB |
| Power rating (TDP) | 105 W |
| Maximum DDR4 speed with this processor | 2133 MHz |
| Processors per node | 1 or 2 (same model) |
| DIMM slots | 8 per processor socket, 16 per node |
| Fits | HPE XL450 Gen9 server node |
| System | HPE Apollo 4500 System |
| Position among 13 v3 kits | Ninth of 13 v3 kits by core count; one of two 10-core kits |
| Spare processor | 762448-001 |
| Heat sink spare | 800377-001 |