Home / Shop
- Description
- Specifications
The 875056-001 is an HPE PCI riser cage. For the ProLiant DL380 Gen10 server it is the primary and secondary PCI riser cage spare part, and customer self repair is mandatory. The tertiary PCI riser cage is a separate spare, 875057-001, with optional customer self repair.
To take a primary or secondary riser cage out, power down the server, disconnect each power cord from the power source and the server, disconnect any external cables on the expansion board, then extend or remove the server from the rack and remove the access panel. Disconnect internal cables on the expansion board, release the full-length expansion board retainer if full-length boards are installed, and lift out the riser cage. To fit the part, reverse the steps.
The server must not run unless every PCI slot has an expansion slot cover or an expansion board installed. Access panel spares for the same server are 875052-001 (SFF model) and 875053-001 (LFF model). Other chassis parts are in the HPE server accessories category.
| Part number | 875056-001 |
| Name | HPE PCI riser cage |
| Position | primary and secondary |
| Customer self repair | mandatory |
| Tertiary PCI riser cage spare | 875057-001 |
| Access panel spares | 875052-001 (SFF model), 875053-001 (LFF model) |
| Slot rule | every PCI slot needs an expansion slot cover or an expansion board |
| Compatible with | HPE ProLiant DL380 Gen10 server |