Home / Shop
- Description
- Specifications
A5150A is a dual channel PCI Ultra2 SCSI host adapter board. It provides two SCSI-3 Ultra2 interfaces for PCI systems that need BIOS support on the add-in adapter, and each channel is a 16-bit Low Voltage Differential or Single-Ended port. The board takes one PCI slot and handles Fast, Ultra and Ultra2 SCSI devices.
Each SCSI interface bursts up to 40 MB/s for wide single-ended transfers and up to 80 MB/s for wide LVD transfers, clocked by a 40 MHz oscillator. The PCI side is a 32-bit or 64-bit DMA bus master at 33 MHz with universal 3.3 V/5 V signaling. Termination is enabled automatically, and each channel has TERMPWR good and shorted LEDs, a serial NVRAM and a flash EEPROM for the BIOS. The board measures about 9.5 by 4.0 inches and has a universal 64-bit card edge with an ISA/EISA bracket.
Channel A uses external 68-pin VHDCI connector J2 and internal 68-pin HD connector J5; channel B uses external VHDCI J3 and internal HD J4. External cables are the 68-pin VHDCI to 68-pin HD A3401A in option 811 (1 meter), 812 (2.5 meters), 813 (5 meters) and 814 (10 meters). Where auto termination is disabled, the internal connector takes the C2370A SCSI LVD/SE VHDTS68 terminator.
A5150A supports HP 9000 L-Class and N-Class servers on HP-UX 11.0 or later and 11i, and N-Class on MPE/iX 7.0 and later. On the HP 9000 rp8420 and HP Integrity rx8620 the maximum is 16 cards with 32 ports, and 15 cards with 30 ports on the HP Integrity rx7620. First HP-UX release is 11.00, hot plug and factory integration are available, and the card does not boot the system.
| Designation | A5150A |
| Manufacturer | HPE |
| Bus | PCI, 32-bit or 64-bit, 33 MHz, universal 3.3 V/5 V |
| Channels | 2 |
| SCSI type | 16-bit Ultra2, LVD and single-ended |
| Burst rate | 80 MB/s LVD, 40 MB/s single-ended |
| External connectors | 2 x 68-pin VHDCI |
| Internal connectors | 2 x 68-pin HD |
| First HP-UX release | 11.00 |
| Boot support | No |
| Max cards and ports | rx7620 15/30; rp8420 16/32; rx8620 16/32 |

