Home / Shop


- Description
- Specifications
AB207A is a Flexible Advantage Starter (FAST) base system for the HP 9000 rp7420 server: a semi-configured system that includes the base chassis and power supplies, with 6 dual core PA-8900/8800 processor modules (12 processors), two cell boards and two core I/O boards.
The rp7420 is a symmetrical multiprocessing server that takes up to 8 dual core PA 8900 (1.1 GHz or 1.0 GHz) or PA 8800 (1.0 GHz or 900 MHz) processor modules, which makes a 16-processor core server, and it uses the sx1000 chip set. Each cell board holds 4 processor module slots, 16 memory DIMM slots and DC-DC power converters, and every cell board needs at least one active core. AB207A spreads 6 dual core modules (12 processors) across both cell boards, which have 8 module slots between them, leaving 2 open. Memory goes in quads of four equal DIMMs, with a minimum of 2 GB per cell and a maximum of 128 GB per system.
In the rp7420 both cell boards must be purchased to access all of the available I/O slots. The LAN/SCSI card of each core I/O set takes one of the sixteen PCI slots, which leaves fourteen for expansion cards when the second core I/O set is present. The second core I/O set enables dual hard partitioning (nPars) and access to a second set of disk drives, and the four hot-plug disks of the peripheral bay and the DVD or DAT removable media drive can be used.
The rp7420 runs 64-bit HP-UX 11i v1 and 11i v2, has an external Ultra160 LVD SCSI channel, 10/100/1000Base-T LAN and a management processor with web and LAN console. AC input is 200-240V at 50/60 Hz, with a typical maximum power of 2015 VA (1975 W). A rack-mounted rp7420 is 17.5 in (445 mm, 10 EIA units) high, 19 in (482 mm) wide and 30 in (762 mm) deep, and weighs 224 lb (101.6 kg).
| Designation | HP 9000 rp7420 FAST base system, includes base chassis and power supplies |
| Processor modules | 6 dual core PA-8900/8800 (12 processors) |
| Cell boards | 2 |
| Core I/O boards | 2 |
| PCI slots enabled | 14 with two core I/O sets |
| Internal disks reachable | 4 with two core I/O sets |
| Memory | Quads of 4 equal DIMMs, minimum 2 GB per cell, up to 128 GB per system |
| Power input | 200-240V, 50/60 Hz |
| Typical maximum power | 2015 VA (1975 W) |
| Rack size | 17.5 in high, 19 in wide, 30 in deep |
| Weight | 101.6 kg (224 lb) |
| Other rp7420 FAST numbers | AB205A, AB206A, AB208A |
