Home » Store » HPE » HP-UX Interface Card » AD167A HP Emulex PCI-X 1-channel 4Gb/s Fibre Channel HBA

AD167A HP Emulex PCI-X 1-channel 4Gb/s Fibre Channel HBA

AD167A is an Emulex PCI-X single-channel 4Gb/s Fibre Channel host bus adapter with an LC connector.

Sourcing mission-critical hardware shouldn't mean gambling on auction sites or automated shopping carts. You get direct access to dedicated specialists who answer the phone, confirm exact compatibility, and deliver project-ready pricing built around your deployment timeline.

Home / Shop

AD167A HP Emulex PCI-X 1-channel 4Gb/s Fibre Channel HBA
AD167A HP Emulex PCI-X 1-channel 4Gb/s Fibre Channel HBA
AD167A HP Emulex PCI-X 1-channel 4Gb/s Fibre Channel HBA

Home / Shop

AD167A HP Emulex PCI-X 1-channel 4Gb/s Fibre Channel HBA

Model Number: AD167A
AD167A is an Emulex PCI-X single-channel 4Gb/s Fibre Channel host bus adapter with an LC connector.
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Missing Inquiry Options
*Your Name:
*Your Email:
*Your Message:
Please send me a copy
0.000
Manufacturer: HPE
Facebook
X
Email
LinkedIn
  • Description
  • Specifications

AD167A is an Emulex PCI-X single-channel 4Gb/s Fibre Channel host bus adapter with an LC connector; its HP model name is FC2143. Under Windows on the HP Integrity rx7620 it installs to a maximum of 8 cards and 8 ports, and on the HP Integrity rx8620 to a maximum of 12 cards and 12 ports; hot plug and factory integration are both available.

HP-branded Emulex 4Gb Fibre Channel adapters, AD167A with its two-port sibling AD168A (FC2243) among them, received new firmware on 26 November 2007: BIOS 1.71a0, universal boot 5.02a1 and firmware 2.72a2. The Linux driver for RHEL 5 and SLES 10 SP1 is 8.1.10.11 with Multipulse 2.2.29 and HBAnyware 3.2a16, and the Windows Storport driver is 2.00a12 with HBAnyware 3.3a14.

On Superdome systems with 16, 32 or 64 processors AD167A runs Windows and Linux with an LC connector and a maximum of 24 cards in each system size. Windows has no factory boot support, though boot support is possible with complete system integration in the field, and Linux takes 8 cards per partition.

In the HP Integrity rx6600, AD167A under Windows has boot support and an LC connector, with a maximum of 6 cards in the PCI-X backplane and 4 in the PCI Express backplane. Under Linux the maximums are 6 and 0, there is no on line add and replace support, and QLogic and Emulex HBAs cannot share a server.

Emulex Fibre Channel HBAs such as AD167A support a maximum I/O transfer packet size of 1 MB, against 2 MB for QLogic HBAs, so mixing the two in a Windows MPIO configuration can cause a BSOD 0x000000D1 with a reference to elxstor.sys. On Linux the card appears as an Emulex Helios LightPulse Fibre Channel host adapter, revision 01.

DesignationAD167A
ManufacturerHPE
TypeFibre Channel host bus adapter
BusPCI-X
Channels1
Speed4 Gb/s
ConnectorLC
Chip makerEmulex
HP model nameFC2143
Maximum on rx76208 cards / 8 ports
Maximum on rx862012 cards / 12 ports
Superdome maximum24 cards, Windows and Linux, 8 per partition on Linux
rx6600 maximum (Windows)6 PCI-X / 4 PCI Express backplane cards
Max I/O transfer packet size1 MB