Home / Shop
- Description
- Specifications
The ASR1004-PWR-AC is the Cisco ASR1004 AC Power Supply. The ASR 1004 router has two power supply bays at the rear and takes either two AC power supplies or two -48 VDC power supplies, in power supply slot 0 and slot 1.
Each AC power supply has a standby switch, status LEDs, a DB-25 alarm connector, a fan, an AC power inlet and a handle. To install one, insert it in slot 0 or slot 1 until it is fully seated, tighten the captive screws, insert the AC power cable into the inlet, plug the cable into the power source and turn the power supply switch to On.
AC and -48 VDC supplies cannot be combined in the same chassis, and every ASR 1000 Series AC power supply must connect to a branch circuit that does not exceed 20 A. The router that takes it is the ASR1004 Cisco ASR 1004 Aggregation Services Router chassis, and more modules are in Cisco interface cards.
| Part number | ASR1004-PWR-AC |
| Type | AC power supply for the Cisco ASR 1004 router |
| Description | Cisco ASR1004 AC Power Supply |
| Bays | 2, power supply slot 0 and slot 1 (rear) |
| Controls and connectors | Standby switch, LEDs, DB-25 alarm connector, AC power inlet, handle |
| Cooling | Integral power supply fan |
| Mixing | AC and -48 VDC supplies cannot be combined in one chassis |
| Branch circuit | Maximum 20 A for ASR 1000 Series AC power supplies |
| Compatible with | Cisco ASR 1004 router (ASR1004) |