Cisco Catalyst 1200 24-Port Full PoE+ Switch with 4 x 10G SFP+ Uplinks, C1200-24FP-4X

C1200-24FP-4X is the Catalyst 1200 rack-mount switch with 24 Gigabit RJ-45 PoE+ ports and four 10 Gigabit SFP+ slots, 28 system ports in all. The SFP+ uplinks run at 10 Gbps or 1 Gbps.

The PoE budget is 375 W across the 24 ports, with up to 30 W available per Gigabit port. Switching capacity is 128 Gbps, wire-speed and non-blocking, and the forwarding rate is 95.23 Mpps for 64-byte packets, with a 1.5 MB packet buffer shared across the ports.

Power comes from an internal universal supply for 100 to 240 V at 50 to 60 Hz. System consumption is 41.1 W at 110 V and 40.9 W at 220 V; with PoE loaded it is 452.9 W at 110 V and 450.4 W at 220 V, and idle draw is 22 W at 110 V. Heat dissipation is 1544.4 BTU/hr. One fan cools the chassis at 34.8 dBA measured at 25 C.

The chassis measures 445 x 345 x 44 mm (17.5 x 13.59 x 1.73 in) and weighs 4.6 kg (10.14 lb). 19-inch mounting brackets are included. Calculated MTBF is 698,220 hours at 25 C.

A dual-core ARM CPU at 1.4 GHz runs the switch with 1 GB of DDR4 DRAM and 512 MB of flash. The MAC table holds 8,000 addresses, up to 255 VLANs can be active, and jumbo frames pass up to 9,000 bytes. Up to 4 port channels of 8 ports each can be built. Management is through an RJ-45 console or a USB Type-C console port.