Home / Shop


- Description
- Specifications
The HWIC-4ESW-POE is a Cisco 4-port EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC with a power daughter card. It has four 10/100 switched Ethernet ports and a 4-port inline power daughter card. Each port can supply 802.3af or Cisco prestandard inline power to IP phones and wireless access points.
The card is a managed Layer 2 switch in a single-wide HWIC form factor. It supports IEEE 802.1D Spanning Tree Protocol, 802.1Q VLANs with up to 15 VLANs, 802.1p class of service, 802.1x security and full duplex. The inline power function needs the router's inline power supply, and the PoE option is not available on the Cisco 1841 router. The HWIC-4ESW-POE weighs 108 grams (0.24 lb).
It is supported in the Cisco 2801, 2811, 2821, 2851, 3825 and 3845 routers, and in the Cisco 1941, 2901, 2911, 2921, 2951, 3925 and 3945 routers. Without the power daughter card the same four-port switch is the HWIC-4ESW, and the spare for this card is HWIC-4ESW-POE=.
Routers that take the card include the CISCO2811 router with 4 HWIC slots and the CISCO2821 router. Related WAN and LAN cards are in Cisco interface cards.
| Part number | HWIC-4ESW-POE |
| Type | 4-port Cisco EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC with power daughter card |
| Ports | 4 x 10/100 switched Ethernet |
| Inline power | 4 ports, IEEE 802.3af and Cisco prestandard |
| Form factor | single-wide HWIC |
| VLANs | up to 15 (IEEE 802.1Q) |
| Spanning tree | IEEE 802.1D |
| Weight | 108 grams (0.24 lb) |
| PoE on Cisco 1841 | not available |
| Spare number | HWIC-4ESW-POE= |
| Compatible with | Cisco 2801, 2811, 2821, 2851, 3825, 3845, 1941, 2901, 2911, 2921, 2951, 3925 and 3945 routers |
