Home / Shop


- Description
- Specifications
IBM feature code EN1A is a PCIe3 32Gb 2-port Fibre Channel adapter for IBM Power systems of machine types 9009, 9105 and 9223. It is a high-performance 8x short form adapter based on the Broadcom LPe32000-series PCIe host bus adapter. The CCIN is 578F.
The adapter has two ports of 32Gb Fibre Channel capability using SR optics, and each port can provide up to 32Gb Fibre Channel functions at the same time. The ports are SFP+ with an optical SR transceiver included, LC type connectors and shortwave laser optics. Each port provides single initiator capability over a fibre link, and with NPIV multiple initiator capability is available. Link speeds are 8, 16 and 32 Gbps, and the adapter negotiates automatically to the highest speed possible.
EN1A and EN1B are electronically identical. They differ physically only in the tail stock: EN1A has a tail stock for full high PCIe slots, and EN1B has a short tail stock for low profile PCIe slots. Each port has two LED indicators on the bracket that report boot status and the operating condition of the port. An optional wrap plug, feature ECW0, is required for some diagnostic procedures and can in some cases speed system boot when placed in empty ports.
Cables are the responsibility of the customer. Multimode fibre optic cable with short-wave lasers and LC connectors is required. At 32GFC, OM4 fibre reaches 100 m, OM3 reaches 70 m and OM2 reaches 20 m, and OM1 is not supported at that speed. The hardware cannot detect which cable length and type is installed, so the maximum negotiation speed must be set manually, because too high a speed can cause bit errors.
On the Power System S922 (9009-22A) the adapter needs a full high profile PCIe Gen3 slot. The minimum required is 0 and the maximum allowed is 18, with an initial order maximum of 18. It can be ordered on the initial order or as an MES, customer set-up is Yes, and no parts are returned with an MES. Supported operating systems are SUSE Linux Enterprise Server 12 Service Pack 3 or later, Red Hat Enterprise Linux, Ubuntu Server and AIX at the 7.2, 7.1 and 6.1 levels, with IBM i through VIOS. More cards are in IBM interface cards.
| Feature code | EN1A |
| Description | PCIe3 32Gb 2-port Fibre Channel Adapter |
| Machine types | 9009, 9105, 9223 |
| CCIN | 578F |
| Chipset | Broadcom LPe32000-series PCIe host bus adapter |
| Ports | 2 x 32Gb Fibre Channel, SFP+ SR optical, LC connectors |
| Link speeds | 8, 16, 32 Gbps |
| Slot | Full high profile PCIe Gen3 (EN1B is the low profile twin) |
| Maximum allowed (9009-22A) | 18 |
| Order type | Initial order or MES |
| Customer set-up (CSU) | Yes |
| Return parts on MES | No |
| Cable reach at 32GFC | OM4 100 m, OM3 70 m, OM2 20 m |
