Home / Shop / Aruba
- Description
- Specifications
J9019A is the HPE 2510-24 switch (E2510-24), the Fast Ethernet model of the 2510 series. It has 24 RJ-45 auto-sensing 10/100 ports with Auto-MDIX and half or full duplex, plus 2 dual-personality ports; each of those can be used as an RJ-45 10/100/1000 port or an open mini-GBIC slot.
Performance figures from HPE are 100 Mb latency under 4.9 µs, up to 6.5 million packets per second and 8.8 Gb/s switching capacity, with an 8,000-entry MAC address table. The processor is a MIPS 32 at 264 MHz with 8 MB flash, 64 MB SDRAM and a 384 KB packet buffer.
It is a low-power 1U unit: the 2510-24 draws 20 W, with a maximum heat dissipation of 71.74 kJ/h, and has no fan (acoustic power 0 dB). It measures 4.39 x 44.25 x 23.62 cm (1.73 x 17.42 x 9.3 in) and mounts in an EIA-standard 19-inch telco rack or cabinet, or on a horizontal surface. It accepts 100-127 or 200-240 V ac at 50/60 Hz.
The rack kit listed against J9019A is 5069-6535: two rack-mounting brackets, eight 8 mm M4 screws for the chassis, four 5/8-inch 12-24 rack screws and four rubber feet.
HPE PartSurfer marks J9019A as no longer supported by HP as of May 31, 2013. HPE's 2013 end-of-sale notice for the 2510 and 2520 series lists J9019B (HP 2510-24 Switch) and names the 2530 series as the replacement family.
The gigabit 2510 models are in the HPE switch category.
| Part number | J9019A |
| Model | HPE 2510-24 Switch (E2510-24) |
| Ports | 24 RJ-45 auto-sensing 10/100 |
| Dual-personality ports | 2 (RJ-45 10/100/1000 or open mini-GBIC) |
| Switching capacity | 8.8 Gb/s |
| Throughput | Up to 6.5 million pps |
| MAC address table | 8,000 entries |
| Processor and memory | MIPS 32 at 264 MHz, 8 MB flash, 64 MB SDRAM |
| Power consumption | 20 W |
| Dimensions | 4.39 x 44.25 x 23.62 cm |
| Voltage | 100-127 / 200-240 V ac, 50/60 Hz |
| Rack kit | 5069-6535 |
| Service parts support ended | May 31, 2013 (HPE PartSurfer) |

