Home / Shop / IBM / SSD (IBM / Lenovo)
- Description
- Specifications
The S3700 400GB SATA 2.5" MLC HS Enterprise SSD carries Lenovo option number 41Y8336 and feature code A4FN. Capacity is 400GB, form factor 2.5-inch and ships mounted on a 2.5-inch hot-swap tray.
The S3700 Enterprise drives use Intel 25 nm MLC NAND with High Endurance Technology (HET), which Lenovo describes as NAND silicon enhancements plus SSD NAND management that extend write endurance. Other listed features: 6 Gbps SATA, AES 256-bit encryption, full end-to-end data path protection, enhanced power loss data protection and 6 W typical power.
The specification table rates 41Y8336 at 7.3 PB written over a five-year life, 75,000 read and 36,000 write IOPS, 500 MBps sequential read and 460 MBps sequential write, with 6 W typical power.
The difference from Enterprise Value drives is endurance: Lenovo says an S3700 can be fully rewritten up to ten times per day across a five-year life, while an Enterprise Value SSD sustains about 0.4 full writes per day for the same life.
Supported servers named by Lenovo: the x3100 M4 and M5, x3250 M4, x3300 M4, x3500 M4, x3530 M4, x3550 M4, x3650 M4 and x3650 M4 HD, x3690 X5, x3750 M4 and x3850 X5/x3950 X5, plus BladeCenter HS22, HS23 and HS23E and Flex System x220, x240 and x440. Lenovo's Configuration and Options Guide of 17 January 2017 also lists it for the x3100 M5 (5457) and x3750 M4 (8753), marked with an asterisk as withdrawn.
Fit check: one of the servers named above with a free 2.5-inch hot-swap bay, and a drive marked 41Y8336 (FC A4FN). Compare 41Y8331 and 41Y8341.
| 41Y8336 Specs | |
| Part number | 41Y8336 |
| Feature code | A4FN |
| Interface | 6 Gbps SATA |
| Form factor | 2.5-inch |
| Hot-swap | yes |
| Endurance | 7.3 PB TBW (5 years) |
| IOPS (4KB read/write) | 75,000 / 36,000 |
| Sequential read/write (128KB) | 500 / 460 MBps |
| Typical power | 6 W |
| MTBF | 2,000,000 hours |


