Home / Shop
- Description
- Specifications
Two 100 Gigabit Ethernet ports, each taking a CFP optic, make up this M2-Series XL module for Nexus 7000 chassis in the Cisco interface cards range. Each port can run in 10, 40 or 100 Gigabit Ethernet mode, and 100GbE is non-blocking on both ports.
Chassis density is 32 ports in the 18-slot chassis, 16 in the 10-slot, 14 in the 9-slot and 4 in the 4-slot chassis. Port buffers are 62.46 MB ingress and 31.23 MB egress per port, and the module carries 2 GB of DRAM with two integrated forwarding engines delivering 120 million packets per second of IPv4 unicast and 60 million of IPv6.
Supported CFP optics at 40 GbE are short-reach multimode at 850 nm, reaching 150 m on OM4, and long-reach single-mode at 1310 nm, reaching 10 km. At 100 GbE the short-reach multimode type also reaches 150 m on OM4 and the long-reach single-mode type reaches 10 km at 1310 nm.
Host chassis are the 4-, 9-, 10- and 18-slot Nexus 7000 models, and the module works with Fabric-1 and Fabric-2, with Supervisor 1, 2 and 2 Enhanced, and with NX-OS 6.1 or later. Power is 690 W typical and 795 W maximum, weight is 17 lb (7.7 kg), and the XL tables hold up to 1 million IPv4 routes and 128K ACL entries.
Related: Cisco Nexus 7000 parts
| Part number | N7K-M202CF-22L |
| Ports | 2 x 100 Gigabit Ethernet CFP |
| Port modes | 10, 40 or 100 Gigabit Ethernet |
| Forwarding | 120 Mpps IPv4 unicast, 60 Mpps IPv6 unicast |
| Memory | 2 GB DRAM |
| Port buffer | 62.46 MB ingress, 31.23 MB egress per port |
| Minimum software | NX-OS 6.1 |
| Power | 690 W typical, 795 W maximum |
| Weight | 17 lb (7.7 kg) |
| Dimensions (H x W x D) | 1.733 x 15.3 x 21.9 in (4.4 x 38.9 x 55.6 cm) |
| Operating temperature | 0 to 40 C |