Home / Shop
- Description
- Specifications
The P-5GS6-R16SA-GL is a Cisco 5G Sub-6 GHz pluggable interface module that adds 5G to the Cisco IoT Industrial Router family. It is built around an EM9293 modem and first supported in IOS XE release 17.15.1a. Its faceplate is shared with the P-5GS6-GL.
The faceplate has four SMA antenna ports, ANT 0 to ANT 3, and an SMA GPS port, along with Enable, SIM 0, SIM 1, GPS and Service LEDs and an M3.5 thumb-screw. The band mapping spans 3G WCDMA, 4G LTE and 5G NR Sub-6G across the four antenna ports, with ANT 0 and ANT 2 as the filtered ports, and bands in parentheses are used for EN-DC or carrier aggregation.
With a 5G-ANTM-O-4-B antenna the main 0, main 1, diversity 0 and diversity 1 connectors map to ANT 0, ANT 1, ANT 2 and ANT 3, and the GNSS connector maps to GPS. IoT routing platforms take a maximum of two pluggable modules in any mix of 5G and 4G modules.
A module can be started or stopped from the CLI in exec mode, and it can be powered off to cut power use. FDD Band 30 can be disabled for vehicular use.
| Designation | P-5GS6-R16SA-GL |
| Type | 5G Sub-6 GHz pluggable interface module |
| Modem | EM9293 |
| First software support | IOS XE 17.15.1a |
| Antenna ports | 4 x SMA (ANT 0 to ANT 3) |
| GPS | SMA port |
| LEDs | Enable, SIM 0, SIM 1, GPS, Service |
| Radio access | 3G WCDMA, 4G LTE, 5G NR Sub-6G |
| Modules per router | maximum 2 pluggable modules |
| Controls | start and stop from CLI exec mode |