HPE ProLiant DL380 Gen10 P24850-B21 Server, Xeon Gold 6250, 32 GB, S100i, 8SFF NC

This is a factory-configured HPE ProLiant DL380 Gen10 (2U): one Xeon Gold 6250 processor, 32 GB of registered DDR4, S100i storage and eight 2.5-inch drive bays, per HPE PartSurfer's model description for P24850-B21. Intel lists the 6250 as a 2nd Gen Xeon Scalable (Cascade Lake) processor with 8 cores / 16 threads, 3.90 GHz base and 4.50 GHz turbo, 35.75 MB cache and a 185 W TDP, with memory support up to DDR4-2933.

With S100i in the name, P24850-B21 relies on HPE's embedded software RAID: 14 SATA ports with 12 accessible, UEFI mode only, disabled until switched on. The NC tag means Network Choice, so instead of an embedded LOM the P24850-B21 configuration carries a FlexibleLOM chosen by HPE. Drive bays start at 8 SFF with none installed, and HPE lists the 8SFF NC chassis as expandable to 24 SFF front plus 6 SFF rear.

The 6250 configuration runs on an 800 W Flex Slot supply, with three PCIe slots standard (x8, x16, and x8 with dual M.2); adding a matching second 6250 raises that to eight slots, since HPE does not allow mixed processor models. HPE's second-processor kit for this CPU is P24475-B21; the P24475-B21 kit ships with two extra fans. HPE's QuickSpecs list extra rules for the Gold 6250: it requires the high-performance fan kit (867810-B21) in 8SFF chassis and is not supported with NVMe SSDs, rear 2SFF drive kits, GPUs or the 4LFF mid-tray. Fit check: the front serial label pull tab carries the model number, so confirm it reads P24850-B21 and that the fitted parts match the configuration above.

The Gold 6250 requires the 867810-B21 fan kit in 8SFF chassis and is not supported with NVMe; P24845-B21 is a related build in HPE ProLiant DL380 Gen10 spare parts.