P37863-B21 HPE DL360 Gen10 Plus Standard Heat Sink Kit

P37863-B21 is the HPE ProLiant DL360 Gen10 Plus Standard Heat Sink Kit. It is the standard cooling option for the HPE ProLiant DL360 Gen10 Plus server and is matched to processors with a TDP from 85W to 140W, both limits included.

Processors with a TDP equal to or greater than 150W require the High Performance Heat Sink Kit, P26479-B21, so the standard kit does not cover them. In the cooling summary for the server, the 85W to 140W band pairs this heat sink with standard fans: 5 are included on the base server, and the Standard Fan Kit P37861-B21 adds the rest for two-processor configurations.

For that same 85W to 140W band, the DDR4 DIMM Blank Kit P07818-B21 is required. It instructs the factory to install blanks on unused DIMM slots, with a maximum of 1 kit per system, and it is also required by processors starting at 230W.

Configure-to-order DL360 Gen10 Plus 8SFF models with the Intel Xeon 4309Y at 105W, 4310 at 120W, 4314 at 135W or 5315Y at 140W come with one standard heatsink. Processor option kits ship with the processor only, so adequate fans and heat sinks, standard or high performance, must be selected with them.

The spare number is P31216-001, a standard heat sink.