Home / Shop


- Description
- Specifications
QFX5100-96S-DC-AFO, also searched as QFX5100-96S-DC, is the air-out version of the DC-powered 2U QFX5100 switch with 96 SFP+ and 8 QSFP+ ports. Cool air comes in through the port end and warm air exits where the fans and power supplies are, so AIR OUT labels face the hot aisle.
Its three fan modules are QFX5100-96S-FANAFO in Juniper Gold. The DC power supply has a terminal block, an ESD grounding point, an ejector lever and a handle, and four terminals marked V-, V-, V+ and V+; the same-polarity terminals are shunted inside, so they can be wired together from one source for extra current path but never to different sources. An amber Fault LED means replace the supply, and leave it in place until then to keep airflow right.
The switch can be a member of a QFX Virtual Chassis, a spine or leaf in a Virtual Chassis Fabric, or a line card in a mixed QFX5110 Virtual Chassis, in which a QFX5110-32Q must be the primary. Each SFP+ port works at 10 Gbps, 1 Gbps or 100 Mbps with the right optics.
The DC feed arrives on dual inputs; this 2U model draws 315 W typical and 470 W at most, the same for AC and DC versions, and it needs 850 W DC supplies. Changing airflow on an installed chassis means replacing all fans and all power supplies together.
The air-in DC unit is QFX5100-96S-DC-AFI, the AC air-out unit is QFX5100-96S-AFO, and the AC air-in unit is the QFX5100-96S-AFI. Find other models in Juniper switches.
| Part number | QFX5100-96S-DC-AFO |
| Also sold as | QFX5100-96S-DC |
| Ports | 96 SFP+ and 8 QSFP+ |
| Power | DC, 2 supplies, 850 W, dual feeds |
| Airflow | air out (port-to-FRU) |
| Fan modules | 3, QFX5100-96S-FANAFO (Juniper Gold) |
| Power consumption | 315 W typical, 470 W maximum |
| Management ports | 2 |
| Supply terminals | V-, V-, V+, V+ with ESD grounding point |
| Size | 2U |
| Virtual Chassis | member; VCF spine or leaf |
| SFP+ speeds | 10 Gbps, 1 Gbps, 100 Mbps |
