Home / Shop
- Description
- Specifications
R0Q86B is the iSCSI member of the HPE MSA 1060 family: a 2U, 24-bay SFF storage array with copper 10GBASE-T host connections. The chassis arrives with two MSA 1060 controllers, two AC power supplies, two 1.5 m PDU cords (IEC C13/C14) and a rack-mount kit, and the B suffix means a 94% efficient power supply that meets EU Lot 9.
The controllers support 1/10 Gb iSCSI over copper for IPv4 and IPv6, with auto-negotiation down to 1 Gb, and there are four host ports per array. No SFP modules are needed for this model. Both controllers work active/active and share 24 GB of system cache, while a single-controller setup is supported only after a failover to the partner controller.
Volumes and hosts scale to 1,024 volumes per array (512 per pool), 512 hosts and 1,024 initiators. Snapshots start at 64 and reach 512 with the Data Services license. Management runs through the SMU v4 web interface, a RESTful interface and the CLI.
Expansion uses MSA 2060 enclosures, up to three per array, giving 96 SFF drives at most. Remote Snap replication works between this array and the HPE MSA 2060 or MSA 2062 arrays. Neighbouring arrays and enclosures are collected in the HPE storage arrays category.
| Part number | R0Q86B |
| Type | HPE MSA 1060 10GBASE-T iSCSI SFF storage array |
| Form factor | 2U, 24 SFF drive bays |
| Controllers | 2, active/active |
| Host connectivity | 1/10 Gb iSCSI (IPv4 and IPv6), copper 10GBASE-T, 4 ports per array |
| SFP modules | not required |
| System cache | 24 GB |
| Volumes | 1,024 per array |
| Snapshots | 64 standard, 512 with the Data Services license |
| Drive enclosures | 0 to 3, up to 96 SFF drives |
| In the box | 2 controllers, 2 AC power supplies, 2 x 1.5 m PDU cords (IEC C13/C14), rack-mount kit |
| Compatible with | HPE ProLiant DL and ML servers, HPE c-Class blade servers, Integrity servers (IA64); confirm the exact pairing at HPE SPOCK |